Enclosures and housings
Wind Turbine Blade with Tapered Winglet
- Bounding box
- 64.9 × 229.2 × 22.7 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 3D wind turbine blade with an integrated **tapered winglet** at its outer tip. **Winglet dimensions:** - Height: 9.5 mm - Root chord: 20 mm - Tip chord: 10 mm - Cant angle: 90° relative to the blade plane **Winglet geometry:** - Taper linearly from 20 mm at the base to 10 mm at the top. - Maintain a smooth aerodynamic airfoil cross-section. - Use a continuous, smooth connection between the blade and winglet. - Avoid sharp edges, gaps, or abrupt geometric transitions. **Blade requirements:** - Create a realistic wind turbine blade with aerodynamic geometry. - Maintain a consistent airfoil profile and smooth blade surfaces. - Integrate the winglet naturally into the blade tip. - Produce a single watertight solid suitable for SolidWorks and ANSYS Fluent. **Output:** A complete 3D CAD model, exportable as STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Blade Length | 200 mm | 50 – 400 |
| Root Chord | 60 mm | 20 – 120 |
| Root Max Thickness | 10 mm | 2 – 30 |
| Blade Tip / Winglet Root Chord | 20 mm | 5 – 50 |
| Blade Tip Max Thickness | 3 mm | 0.5 – 10 |
| Winglet Height | 9.5 mm | 3 – 30 |
| Winglet Tip Chord | 10 mm | 2 – 30 |
| Winglet Tip Max Thickness | 1.5 mm | 0.5 – 8 |
| Cant Angle | 90 deg | 70 – 110 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no