Enclosures and housings
Wind Tunnel Testing Chamber
- Bounding box
- 275 × 180 × 95 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
MODIFY THE EXISTING WIND TUNNEL MODEL. IMPORTANT: The top window MUST be a real rectangular cut-out through the top wall. Do NOT create a solid top panel with a transparent appearance, glass texture, or decorative outline. TOP WINDOW – CRITICAL REQUIREMENT: - Overall box length: 275 mm. - Overall box breadth: 180 mm. - Top opening dimensions: EXACTLY 235 mm × 120 mm. - Cut completely through the 5 mm thick top wall. - Centre the opening on the top surface. - Leave 20 mm material at each end along the length. - Leave 30 mm material on each side along the breadth. - The interior of the box must be visible through this opening. - Keep the opening unobstructed. - Do not fill it with any material. The top should look like a rectangular frame with a large open centre, not a solid sheet. PRESERVE ALL OTHER EXISTING FEATURES: 1. External dimensions: 275 × 180 × 95 mm. 2. Wall thickness: 5 mm. 3. Long-side window: 245 × 65 mm, cut-through. 4. One completely open end. 5. Opposite-end centred opening: 55 × 65 mm. VALIDATION: Before completing the model, verify that the top face contains an actual through-hole measuring 235 × 120 mm. Use a section view or underside view to confirm that the opening is not blocked. Do not change any other dimensions or features.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length along X | 275 mm | 100 – 600 |
| Outer width along Y | 180 mm | 60 – 400 |
| Outer height along Z | 95 mm | 40 – 300 |
| Uniform wall thickness | 5 mm | 2 – 15 |
| Side cut-out length along X | 245 mm | 50 – 580 |
| Side cut-out height along Z | 65 mm | 20 – 280 |
| Top cut-out length along X | 235 mm | 50 – 580 |
| Top cut-out width along Y | 120 mm | 30 – 380 |
| End opening width along Y | 55 mm | 10 – 170 |
| End opening height along Z | 65 mm | 10 – 90 |
| Pane thickness | 5 mm | 1 – 12 |
| Sliding fit gap per side | 0.2 mm | 0 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
