Enclosures and housings
Wind Tunnel Testing Chamber
- Bounding box
- 275 × 180 × 95 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, dimensionally accurate 3D CAD model of a rectangular wind tunnel testing chamber. **Overall external dimensions:** - Length: 275 mm - Width: 180 mm - Height: 95 mm - Uniform wall thickness: 5 mm **Design requirements:** 1. Main structure: - Create a hollow rectangular box with a flat base, two long side walls and a top panel. - Maintain a uniform 5 mm wall thickness. - Keep all external edges straight and square. 2. Long-side viewing window: - Add a rectangular cut-out on one of the long side walls. - Window dimensions: 245 mm × 65 mm. - Centre the window on the wall. - Leave 15 mm margins on both ends and 15 mm margins at the top and bottom. 3. Top viewing window: - Add a rectangular cut-out on the top panel. - Window dimensions: 235 mm × 120 mm. - Centre the window on the top surface. - Leave 20 mm margins along the length and 30 mm margins along the width. 4. Inlet opening: - Keep one complete shorter end (180 mm × 95 mm) fully open. - Do not add any panel or wall across this opening. 5. Opposite-end opening: - On the opposite shorter end wall, create a rectangular opening measuring 55 mm × 65 mm. - Position it exactly at the centre of the end wall. - Maintain equal margins around the opening. 6. Material and appearance: - Model the main structure as a solid, matte white or light-grey material. - Represent the side and top viewing windows using transparent acrylic. - Clearly distinguish the transparent panels from the structural walls. - Keep the inlet completely unobstructed. **CAD output requirements:** - Produce a watertight, hollow 3D CAD model with correctly positioned cut-outs. - Use millimetres as the working units. - Maintain the specified external dimensions and 5 mm wall thickness. - Provide an isometric 3D view, front view, top view and side view. - Include dimension annotations. - Make the model suitable for physical fabrication using acrylic sheets, laser cutting or 3D printing. - Do not add fans, motors, internal supports or other components that were not requested.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length along X | 275 mm | 100 – 600 |
| Outer width along Y | 180 mm | 60 – 400 |
| Outer height along Z | 95 mm | 40 – 300 |
| Uniform wall thickness | 5 mm | 2 – 15 |
| Side cut-out length along X | 245 mm | 50 – 580 |
| Side cut-out height along Z | 65 mm | 20 – 280 |
| Top cut-out length along X | 235 mm | 50 – 580 |
| Top cut-out width along Y | 120 mm | 30 – 380 |
| End opening width along Y | 55 mm | 10 – 170 |
| End opening height along Z | 65 mm | 10 – 90 |
| Transparent pane thickness | 5 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
