Brackets and mounts
Wilwood-style Tandem Remote Brake Master Cylinder
- Bounding box
- 317.1 × 59.5 × 44.2 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
CAD model of Wilwood tandem remote master cylinder from the drawing: 11.53 in overall, 6.26 in eye-to-mount, 3.53 in mount spacing, M10x1.0 banjo outlets, .33 in mount holes, .39 in rod-eye hole
Parameters
| Name | Value | Range |
|---|---|---|
| Rod eye hole dia | 9.9 mm | 6 – 14 |
| Push rod dia | 10 mm | 6 – 14 |
| Rod eye outer dia | 19 mm | 14 – 26 |
| Body start (from eye centre) | 152 mm | 120 – 170 |
| Body diameter | 25.4 mm | 20 – 35 |
| Eye to mount hole 1 | 159 mm | 140 – 175 |
| Mount hole spacing | 89.7 mm | 60 – 110 |
| Mount hole dia | 8.4 mm | 5 – 12 |
| Mount flange width | 44.2 mm | 30 – 60 |
| Ear centre spacing | 36.6 mm | 24 – 50 |
| Mount hole drop below axis | 9 mm | 4 – 14 |
| Eye to rear outlet port | 292.9 mm | 260 – 310 |
| Outlet port spacing | 61.2 mm | 40 – 80 |
| Body end beyond rear port | 14.7 mm | 10 – 20 |
| Banjo boss protrusion | 17 mm | 12 – 22 |
| M10x1.0 tap drill dia | 9 mm | 7 – 10 |
| Port thread depth | 12.7 mm | 8 – 16 |
| Reservoir port 1 position | 188 mm | 170 – 210 |
| Reservoir port 2 position | 266 mm | 240 – 285 |
| Reservoir fitting top height | 40.5 mm | 30 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o