Enclosures and housings
Wi-Fi 6 Router Assembly
- Bounding box
- 220.0 × 143.0 × 197.0 mm
- Engine
- Precision B-rep
- Parameters
- 55
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a highly detailed, industrial-grade 3D solid model of a high-performance Wi-Fi 6 router. Main Body & Shell: - Base Enclosure: Rectangular body measuring 220mm (X/Length) x 140mm (Y/Width) x 35mm (Z/Height). - Ergonomic Curves: Apply a 12mm fillet radius to all four vertical corners, and a 3mm fillet along the top and bottom perimeter edges. - Bottom Base Feet: Add 4 rubberized circular feet (12mm diameter, 3mm height) attached at the four bottom corners. Front Panel & Display: - Center Status Screen: Subtract a recessed rectangular OLED display bezel (40mm width x 15mm height x 1.5mm depth) in the top-center front. - Status LEDs: Subtract a horizontal row of 6 small circular LED indicator cavities (2.5mm diameter, 1mm depth) below the screen, spaced 5mm apart. - Front USB Port: Subtract 1 USB-A 3.0 port cutout (14mm x 7mm x 12mm depth) on the lower-right front corner. Top Surface Ventilation & Styling: - Vent Pattern: Subtract a geometric matrix/grid of 12 parallel angled ventilation slots (3mm width, 60mm length, 2mm depth) across the top surface for thermal management. - Brand Logo Inset: Create a subtle 1mm-recessed circular emblem space (20mm diameter) in the center of the top panel. Rear Panel I/O: - Ethernet Ports: Subtract 4 LAN port cutouts (15mm x 12mm x 10mm depth) and 1 distinct WAN port cutout (15mm x 12mm x 10mm depth) with a 1.5mm raised border outline around the WAN port. - Power Input: Subtract 1 circular DC power socket cutout (6.5mm diameter, 10mm depth). - Controls: Add 1 protruding cylindrical Power Switch (8mm diameter, 3mm protrusion) and subtract 1 pinhole Reset Button cavity (2mm diameter, 5mm depth). Antennas (4-Antenna Design): - Quantity: 4 high-gain adjustable antennas (2 on the rear panel, 1 on the left side, 1 on the right side). - Base Hinges: Cylindrical swivel joints (14mm diameter, 12mm height). - Antenna Shafts: Hexagonal or tapered aerodynamic masts (8mm base tapering to 5mm tip, 160mm total height).
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 220 mm | 120 – 400 |
| Body Width (Y) | 140 mm | 80 – 300 |
| Body Height (Z) | 35 mm | 15 – 100 |
| Foot Diameter | 12 mm | 4 – 30 |
| Foot Height | 3 mm | 1 – 10 |
| Foot Corner Inset | 20 mm | 8 – 60 |
| OLED Recess Width | 40 mm | 10 – 120 |
| OLED Recess Height | 15 mm | 5 – 40 |
| OLED Recess Depth | 1.5 mm | 0.5 – 6 |
| OLED Recess Center Height | 26 mm | 5 – 90 |
| LED Cavity Diameter | 2.5 mm | 1 – 8 |
| LED Cavity Depth | 1 mm | 0.5 – 5 |
| LED Count | 6 pcs | 1 – 12 |
| LED Spacing | 5 mm | 3 – 20 |
| LED Row Center Height | 14 mm | 3 – 90 |
| USB-A Cutout Width | 14 mm | 6 – 30 |
| USB-A Cutout Height | 7 mm | 3 – 20 |
| USB-A Cutout Depth | 12 mm | 3 – 40 |
| USB-A Cutout X Position | 85 mm | 0 – 190 |
| USB-A Cutout Center Height | 12 mm | 3 – 90 |
| Vent Slot Width | 3 mm | 1 – 12 |
| Vent Slot Length | 60 mm | 10 – 200 |
| Vent Slot Depth | 2 mm | 0.5 – 10 |
| Vent Slot Count | 12 pcs | 2 – 24 |
| Vent Slot Pitch | 9 mm | 4 – 30 |
| First Vent X Offset | 33 mm | 10 – 90 |
| Logo Inset Diameter | 20 mm | 5 – 60 |
| Logo Inset Depth | 1 mm | 0.5 – 4 |
| LAN Cutout Width | 15 mm | 6 – 30 |
| LAN Cutout Height | 12 mm | 5 – 25 |
| LAN Cutout Depth | 10 mm | 3 – 30 |
| LAN Port Count | 4 pcs | 1 – 8 |
| First LAN Port X | -70 mm | -200 – 200 |
| LAN Port Pitch | 18 mm | 8 – 40 |
| Rear Port Center Height | 22 mm | 5 – 90 |
| WAN Cutout Width | 15 mm | 6 – 30 |
| WAN Cutout Height | 12 mm | 5 – 25 |
| WAN Cutout Depth | 10 mm | 3 – 30 |
| WAN Cutout X Position | 10 mm | -200 – 200 |
| WAN Raised Border | 1.5 mm | 0.5 – 4 |
| DC Socket Diameter | 6.5 mm | 2 – 20 |
| DC Socket Depth | 10 mm | 3 – 30 |
| DC Socket X Position | 35 mm | -200 – 200 |
| Reset Pinhole Diameter | 2 mm | 1 – 6 |
| Reset Pinhole Depth | 5 mm | 1 – 15 |
| Reset Pinhole X Position | 50 mm | -200 – 200 |
| Power Switch Diameter | 8 mm | 3 – 25 |
| Power Switch Protrusion | 3 mm | 1 – 12 |
| Power Switch X Position | 65 mm | -200 – 200 |
| Power Switch Center Height | 22 mm | 5 – 90 |
| Antenna Hinge Diameter | 14 mm | 6 – 30 |
| Antenna Hinge Height | 12 mm | 4 – 30 |
| Mast Base Diameter | 8 mm | 3 – 20 |
| Mast Tip Diameter | 5 mm | 2 – 15 |
| Mast Length | 148 mm | 40 – 260 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no