Brackets and mounts
Wheelchair Mounting Base Assembly
- Bounding box
- 5004.6 × 300.0 × 355.3 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of ONLY a wheelchair mounting base assembly, without the wheelchair or any external equipment, use a rectangular aluminium plate measuring exactly 400 × 300 × 10 mm with slightly rounded corners, keep the top surface flat and unobstructed, install two identical C-clamps along the same 400 mm long side of the plate, use the manufacturer's clamp dimensions: 111 mm overall height, 47 × 42 mm base, 31 × 61 mm side mounting plate, four M5 threaded holes, configurable hole spacing, add two symmetrical angled circular support rods with a diameter of 30 mm underneath the plate, IMPORTANT: the rods must start from the side opposite the C-clamps and slope downward toward the clamp side, their purpose is to prevent the base from tipping, each rod must end with a C-shaped hook designed to fit around a 25.4 mm (1 inch) circular tube, keep rod lengths, angles and positions adjustable, include suitable mounting adapters, reinforcement and required fasteners, do not invent unverified dimensions, model the C-clamps as separate components and preserve their original geometry, generate an editable assembly with individual parts, isometric view, top view, front view, side view, dimensioned engineering drawing and bill of materials, prepare STEP and STL exports, include ONLY the aluminium plate, two angled support rods, two mounting adapters, two C-clamps and required fasteners, do not include a wheelchair, armrests, wheels, joystick, baseball bat or bat-holding mechanism.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 400 mm | 200 – 700 |
| Plate Width | 300 mm | 150 – 600 |
| Plate Thickness | 10 mm | 6 – 25 |
| Corner Radius | 5 mm | 2 – 20 |
| Adapter Bolt Hole Dia (M8 clr) | 9 mm | 6 – 14 |
| Clamp Hole Dia (M5 clr) | 5.5 mm | 4 – 9 |
| Clamp Centres Spacing | 200 mm | 100 – 340 |
| Adapter Centres Spacing | 200 mm | 100 – 340 |
| Rod Diameter | 30 mm | 15 – 50 |
| Rod Length | 350 mm | 300 – 400 |
| Rod Slope Angle | 30 deg | 10 – 60 |
| Hooked Tube Dia (1 in) | 25.4 mm | 15 – 45 |
| Hook Clearance | 0.7 mm | 0.2 – 3 |
| Hook Radial Thickness | 8 mm | 4 – 16 |
| Hook Width | 30 mm | 15 – 50 |
| Adapter Length | 60 mm | 40 – 100 |
| Adapter Width | 50 mm | 30 – 90 |
| Adapter Thickness | 10 mm | 6 – 20 |
| Clamp Overall Height | 111 mm | 80 – 160 |
| Clamp Base Length | 47 mm | 30 – 80 |
| Clamp Base Width | 42 mm | 25 – 70 |
| Side Mounting Plate Width | 31 mm | 20 – 60 |
| Side Mounting Plate Height | 61 mm | 35 – 100 |
| M5 Hole Spacing | 30 mm | 12 – 45 |
| M8 Bolt Dia | 8 mm | 4 – 16 |
| M8 Bolt Length | 30 mm | 12 – 80 |
| M8 Head Across Flats | 13 mm | 8 – 24 |
| M8 Head Height | 5.3 mm | 3 – 12 |
| M8 Nut Across Flats | 13 mm | 8 – 24 |
| M8 Nut Height | 6.5 mm | 3 – 14 |
| M8 Nut Bore | 8 mm | 4 – 16 |
| Washer OD | 16 mm | 10 – 30 |
| Washer ID | 8.4 mm | 4 – 18 |
| Washer Thickness | 1.6 mm | 0.5 – 5 |
| M5 Screw Dia | 5 mm | 3 – 12 |
| M5 Screw Length | 20 mm | 8 – 60 |
| M5 Head Across Flats | 8 mm | 5 – 16 |
| M5 Head Height | 3.5 mm | 2 – 9 |
| Exploded Layout Gap | 480 mm | 300 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
