Wheel Fender (Mudguard)

1 views

Bounding box: 145 × 50 × 72.5 mm
Engine: 3D Printing B-rep
Parameters: 10
Published: November 11, 2026

Download

Free to download and use. See the terms.

The prompt

Design fender

Parameters

Name	Value	Range
Tyre diameter the fender fits	120 mm	40 – 400
Gap between tyre and fender	8 mm	2 – 40
Fender width across the wheel	50 mm	20 – 150
Shell wall thickness	3 mm	1.5 – 8
Arc coverage around the wheel	180 deg	100 – 240
Stiffening rib height along both side edges	1.5 mm	0.5 – 5
Angular inset of the bolt bosses from the fender ends	18 deg	10 – 60
Diameter of the bolt bosses	12 mm	6 – 30
Boss stand-off above the outer shell	3 mm	0 – 10
Bolt clearance hole diameter - M4 = 4.5	4.5 mm	2 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS