Enclosures and housings
Weed eater cable holder
- Bounding box
- 55 × 34 × 25 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
The arm is wide enough but not thick enough like its wee when looking at it from above bot it should be 20 by 20mm where it intersects with the circle and the supports should be cut out in between not a solid piece as per the photo also look carefully at the small pieces sticking out on the inside look at how they should be and how the arm should look like
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 33 mm | 20 – 60 |
| Inner diameter | 29 mm | 20 – 60 |
| Ring height | 25 mm | 15 – 50 |
| Arm root height | 20 mm | 10 – 40 |
| Arm root depth | 20 mm | 5 – 30 |
| Arm end height | 9 mm | 5 – 20 |
| Arm end depth | 9 mm | 5 – 20 |
| Arm length from side | 19 mm | 10 – 30 |
| Arm curve offset | 13 mm | 5 – 25 |
| Arm wall/rail thickness | 2 mm | 1 – 5 |
| Arm inner spine thickness | 3 mm | 1 – 6 |
| Locking rib radial height | 4 mm | 2 – 8 |
| Locking rib wall thickness | 2 mm | 1 – 5 |
| Locking rib axial height | 8 mm | 3 – 20 |
| Locking rib step length | 2 mm | 0.5 – 5 |
| Side support spacing | 5 mm | 3 – 10 |
| Side support thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
