Enclosures and housings
Wedge Electronics Housing
- Bounding box
- 94 × 38 × 58 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
"Generate a wedge-shaped rectangular electronics housing open at the front, measuring 94 mm wide by 58 mm tall, tapering from 38 mm deep at the bottom base to 20 mm deep at the top, with 2.5 mm thick walls. Inside the four corners, add cylindrical screw standoffs spaced 80 mm wide by 44 mm tall with 2.8 mm screw holes extending forward to the front opening. Cut a 22 mm wide by 8 mm tall USB-C slot on the lower right side wall, and cut four horizontal vent slots measuring 25 mm by 2 mm near the top of the rear wall. On the inner back wall, add two parallel L-shaped retention rails spaced 28.2 mm apart to hold a 63 mm by 28 mm PCB."
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 94 mm | 40 – 200 |
| Overall height | 58 mm | 30 – 150 |
| Depth at base | 38 mm | 15 – 100 |
| Depth at top | 20 mm | 10 – 100 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Boss spacing across | 80 mm | 20 – 180 |
| Boss spacing vertical | 44 mm | 20 – 120 |
| Boss diameter | 10 mm | 5 – 16 |
| Screw hole diameter | 2.8 mm | 2 – 6 |
| Slot width along depth | 22 mm | 8 – 60 |
| Slot height | 8 mm | 4 – 20 |
| Slot centre height | 18 mm | 5 – 50 |
| Vent width | 25 mm | 5 – 80 |
| Vent height | 2 mm | 1 – 6 |
| Rib between vents | 2 mm | 1 – 10 |
| Height of topmost vent centre | 52.5 mm | 20 – 60 |
| PCB width | 63 mm | 20 – 100 |
| PCB height | 28 mm | 10 – 60 |
| Rail projection | 7 mm | 3 – 15 |
| Rail thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
