Brackets and mounts
Wearable Motorized Assistive Glove
- Bounding box
- 180.9 × 198.9 × 28 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Model Generation Directive: Create a 3D assembly model of a wearable motorized assistive glove. The model must feature a central rectangular wrist-and-palm base enclosure (dimensioned to fit hand lengths between 2.5 and 12.5 inches) with an integrated side-mounted motor/battery housing module. Extend four parallel finger cylinders and one offset angled thumb cylinder from the base. Each finger cylinder must feature a series of aligned dorsal semi-circular wire loops/rings to guide internal pull-strings. The interior of the base must remain hollow to house a compact micro-controller and servo motor array.
Parameters
| Name | Value | Range |
|---|---|---|
| Wrist-to-palm length | 110 mm | 64 – 318 |
| Palm width | 90 mm | 50 – 160 |
| Enclosure height | 28 mm | 16 – 60 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Battery/motor housing length | 75 mm | 30 – 140 |
| Housing width | 38 mm | 18 – 90 |
| Housing height | 26 mm | 12 – 60 |
| Index finger length | 75 mm | 30 – 160 |
| Middle finger length | 85 mm | 30 – 160 |
| Ring finger length | 80 mm | 30 – 160 |
| Little finger length | 65 mm | 25 – 160 |
| Thumb length | 65 mm | 25 – 160 |
| Index finger diameter | 18 mm | 10 – 30 |
| Middle finger diameter | 18 mm | 10 – 30 |
| Ring finger diameter | 17 mm | 10 – 30 |
| Little finger diameter | 15 mm | 10 – 30 |
| Thumb diameter | 20 mm | 10 – 40 |
| Pull-string channel diameter | 3 mm | 1.5 – 6 |
| Finger axis height above bed | 16 mm | 8 – 40 |
| Finger insertion into base | 5 mm | 2 – 12 |
| Thumb outward angle | 45 deg | 10 – 80 |
| PCB length | 45 mm | 20 – 80 |
| PCB width | 25 mm | 12 – 60 |
| PCB thickness | 6 mm | 1 – 12 |
| Servo array length X | 60 mm | 30 – 120 |
| Servo array length Y | 40 mm | 20 – 90 |
| Servo array height Z | 22 mm | 10 – 50 |
| Loop outer diameter | 10 mm | 6 – 20 |
| Loop wire diameter | 2 mm | 1 – 4 |
| Loop spacing along finger | 12 mm | 6 – 30 |
| Loops per finger | 4 mm | 1 – 8 |
| First loop distance from base | 18 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl