Enclosures and housings
Wearable Enclosure Base
- Bounding box
- 35.0 × 25.8 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Design a landscape-oriented rectangular electronic enclosure base. The outer dimensions should be 35mm wide (horizontal) by 25mm long (vertical) by 12mm high. Heavily round all four outer vertical corners with a 3mm radius to make it smooth for wearable use. Hollow the inside entirely, leaving a 1.5mm wall thickness. On the top edge of the walls, in the exact top-center (along the 35mm horizontal span), add a 3mm diameter cylinder sticking straight up by 2mm to act as a pivot pin. On the top edge in the bottom-left and bottom-right corners, add two 3.1mm diameter circular holes, 2mm deep, for press-fit magnets. On the bottom-facing wall, centered horizontally, add a 10mm wide by 5mm high rectangular cutout for a USB-C port. Export as a STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width (X) | 35 mm | 20 – 100 |
| Outer Length (Y) | 25 mm | 15 – 100 |
| Outer Height (Z) | 12 mm | 6 – 60 |
| Outer Corner Radius | 3 mm | 0.5 – 8 |
| Wall Thickness | 1.5 mm | 0.8 – 4 |
| Floor Thickness | 1.5 mm | 0.8 – 5 |
| Pivot Pin Diameter | 3 mm | 1 – 6 |
| Pivot Pin Height | 2 mm | 0.5 – 8 |
| Magnet Pocket Diameter | 3.1 mm | 1 – 6 |
| Magnet Pocket Depth | 2 mm | 0.5 – 6 |
| Corner Magnet Boss Dia | 5 mm | 2 – 10 |
| USB-C Cutout Width | 10 mm | 2 – 30 |
| USB-C Cutout Height | 5 mm | 2 – 20 |
| USB-C Cutout Bottom Z | 1.5 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,