Enclosures and housings
Wearable Electronics Enclosure
- Bounding box
- 201.0 × 93.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
Design a wearable electronics enclosure assembly as separate solid bodies. All dimensions are in mm. The origin is the front-left-bottom outer corner of the body, X runs along the length, Y across the width and Z up. BODY: rounded rectangular box, 135 long x 63 wide x 40 tall, 5 radius vertical corners, open at the top, 2.5 walls and 2.5 floor. Four corner posts, 8 diameter, 37 tall, centered at (5.5,5.5), (129.5,5.5), (5.5,57.5), (129.5,57.5), each with a 4.2 diameter x 7 deep hole in the top. A 2 thick full-height partition across the width starting at x=32.5, with a 10 diameter hole through it at y=31.5, z=14. Two ledges, 4 wide x 2 thick, along the inside of both long walls from x=38.5 to x=110.5, top at z=15, to support a perfboard.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 135 mm | 100 – 200 |
| Overall Width | 63 mm | 40 – 100 |
| Overall Height | 40 mm | 20 – 80 |
| Wall Thickness | 2.5 mm | 1 – 5 |
| Floor Thickness | 2.5 mm | 1 – 5 |
| Vertical Corner Radius | 5 mm | 0 – 20 |
| Post Diameter | 8 mm | 4 – 16 |
| Post Height | 37 mm | 20 – 60 |
| Post Hole Diameter | 4.2 mm | 2 – 12 |
| Post Hole Depth | 7 mm | 2 – 15 |
| Front-Left Post X | 5.5 mm | 0 – 130 |
| Front-Left Post Y | 5.5 mm | 0 – 60 |
| Front-Right Post X | 129.5 mm | 0 – 135 |
| Front-Right Post Y | 5.5 mm | 0 – 60 |
| Back-Left Post X | 5.5 mm | 0 – 130 |
| Back-Left Post Y | 57.5 mm | 0 – 63 |
| Back-Right Post X | 129.5 mm | 0 – 135 |
| Back-Right Post Y | 57.5 mm | 0 – 63 |
| Partition Thickness | 2 mm | 1 – 5 |
| Partition Start X | 32.5 mm | 20 – 120 |
| Partition Hole Diameter | 10 mm | 4 – 30 |
| Partition Hole Y | 31.5 mm | 0 – 80 |
| Partition Hole Z | 14 mm | 2 – 38 |
| Ledge Width (protrusion) | 4 mm | 2 – 10 |
| Ledge Thickness | 2 mm | 1 – 5 |
| Ledge Start X | 38.5 mm | 30 – 120 |
| Ledge End X | 110.5 mm | 40 – 130 |
| Ledge Top Z | 15 mm | 5 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no