Enclosures and housings
Waveshare P2.5 64x32 Magnetic LED Matrix Frame
- Bounding box
- 186 × 106 × 33.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 34
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
I would like the case to be deeper and the Adafruit S3 internal to the frame, but buttons and the USBC port accessible.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel width | 160 mm | 40 – 500 |
| Panel height | 80 mm | 20 – 300 |
| Panel body thickness | 4 mm | 1 – 20 |
| Rear connector protrusion | 8 mm | 0 – 30 |
| Bezel overlap on panel front | 2.5 mm | 0.5 – 10 |
| Panel clearance per side | 0.3 mm | 0.1 – 1 |
| Frame rim width | 13 mm | 6 – 30 |
| Frame depth - deep enough to hold the MCU | 30 mm | 8 – 60 |
| Front lip thickness | 3 mm | 1 – 8 |
| Outer corner radius | 6 mm | 0 – 25 |
| Magnet diameter | 6 mm | 3 – 15 |
| Magnet thickness | 3 mm | 1 – 10 |
| Magnet pocket clearance | 0.25 mm | 0.05 – 1 |
| Cover plate thickness | 4 mm | 2 – 10 |
| Panel pressure pad width | 22 mm | 8 – 40 |
| Panel pressure pad depth | 10 mm | 5 – 30 |
| Ribbon cable port width | 44 mm | 10 – 120 |
| Ribbon cable port depth | 16 mm | 6 – 60 |
| Cable port offset from centre | 28 mm | 0 – 60 |
| Board length | 50.8 mm | 20 – 120 |
| Board width | 22.86 mm | 10 – 60 |
| PCB thickness | 1.6 mm | 0.8 – 4 |
| Screw hole inset from board corner | 2.5 mm | 1 – 10 |
| Board standoff height inside the case | 6 mm | 2 – 20 |
| Screw pilot hole dia | 2.2 mm | 1.5 – 6 |
| Standoff diameter | 4.5 mm | 3 – 10 |
| Board centre offset across frame | -40 mm | -70 – 70 |
| Board USB edge to inner wall gap | 3 mm | 1 – 20 |
| USB cable slot width | 14 mm | 8 – 30 |
| Button 1 X from board centre | -5 mm | -12 – 12 |
| Button 1 distance from USB edge | 11 mm | 2 – 40 |
| Button 2 X from board centre | -5 mm | -12 – 12 |
| Button 2 distance from USB edge | 19 mm | 2 – 40 |
| Button access hole dia | 9 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
