Enclosures and housings
Waterproof Dog Collar Enclosure
- Bounding box
- 110 × 60 × 38 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
A waterproof two-piece ergonomic dog collar enclosure. Internal cavity dimensions: 105mm length, 55mm width, 32mm height with 2.5mm wall thickness. Top cover features an internal tray holding a 25x25mm GPS patch antenna facing upward. Bottom shell features a curved underside with a 50mm radius along the length to fit against a dog's neck. Integrates two 26mm x 4mm strap slots on each end for a 25mm nylon collar strap. Includes a 1.5mm recessed gasket groove along the rim of the lower housing for an O-ring seal, and 4 corner screw bosses for M3 thread-forming screws. Smooth rounded outer corners (R5mm).
Parameters
| Name | Value | Range |
|---|---|---|
| Internal cavity length | 105 mm | 50 – 200 |
| Internal cavity width | 55 mm | 30 – 150 |
| Internal cavity height | 32 mm | 15 – 80 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Outer corner radius | 5 mm | 2 – 15 |
| Bottom shell outer height | 26.5 mm | 15 – 50 |
| Bottom floor thickness | 3.5 mm | 2 – 8 |
| Top/bottom rim overlap | 0.5 mm | 0.2 – 1.5 |
| Gasket groove depth | 1.5 mm | 0.6 – 3 |
| Gasket groove width | 1.5 mm | 1 – 2.5 |
| Screw boss diameter | 6.5 mm | 4 – 12 |
| Boss inset from cavity end | 4.5 mm | 3 – 15 |
| Boss inset from cavity side | 4 mm | 3 – 15 |
| M3 thread-forming pilot hole dia | 2.5 mm | 1.5 – 4 |
| M3 clearance hole dia | 3.4 mm | 2.5 – 5 |
| Screw engagement depth | 10 mm | 5 – 20 |
| Strap slot length along Y | 26 mm | 10 – 40 |
| Strap slot height | 4 mm | 2 – 8 |
| GPS antenna tray size | 25 mm | 10 – 40 |
| GPS tray wall thickness | 2 mm | 1.2 – 5 |
| GPS tray wall height | 3 mm | 1.5 – 8 |
| Underside curvature radius | 50 mm | 20 – 200 |
| Underside relief depth | 2 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,