3D preview of Water Purifier Lift Hook Mechanism
Loading the interactive model…
Interactive 3D model of Water Purifier Lift Hook Mechanism

Brackets and mounts

Water Purifier Lift Hook Mechanism

1 views
Bounding box
420.0 × 300.0 × 520.0 mm
Engine
Precision B-rep
Parameters
10
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

The unit lifts a water purifier (up to 50 kg) by sliding a steel finger into a hand-grip groove on the machine side wall. It is NOT a clamp: the load path is groove ceiling -> finger plate -> two linear-guide blocks -> rail -> steel tube shelf -> vertical leg. COORDINATE SYSTEM: origin at the centre of the groove opening on the machine side face. +X horizontal, pointing away from the machine. Y along the groove length. Z up. PARTS (each a separate named solid with a colour): 1. machine_wall (reference, translucent blue-grey): box X -120..0, Y -150..150, Z -110..110, with a groove cut into the X=0 face: Y -50..50, Z -22.5..22.5, depth X -25..0. 2. slide_finger_plate (light-grey steel): single plate X -15..185, Y -40..40, Z -9.5..6.5 (16 thick). Chamfer the 4 edges at the finger tip (X=-15) by 5 mm. 3. pu_pad (orange): X -15..10, Y -40..40, Z 6.5..9.5 on the top face of part 2. 4. guide_block_1 and guide_block_2 (dark grey), approximating HIWIN HGH15CA: 61.4 long (X) x 34 wide (Y), top face at Z=-9.5, overall height 28 measured from rail bottom (4.3 clearance under the block), with a 15 x 15 channel for the rail. Centres at X=75 and X=150. 5. rail (black): 15 x 15 x 220, X 36..256, Y -7.5..7.5, Z -37.5..-22.5. 6. shelf_tube (grey): rectangular steel tube 40 x 40 x 3 (hollow), X 30..260, Y -20..20, Z -77.5..-37.5. 7. leg_tube (grey): rectangular steel tube 40 x 40 x 3 (hollow), X 260..300, Y -20..20, Z -120..400. 8. ghost_retracted: transparent (about 40%) copies of parts 2, 3, 4 shifted +60 mm in X, showing the retracted position of the finger. REQUIREMENTS: - Put every dimension in a parameter block at the top (stroke = 60, groove size, finger thickness, etc.) so they can be changed. - Build an assembly with the part names above; no threads, no fasteners. - Print a clearance table: finger-to-groove clearance above and below (expect 13 mm each), finger tip to groove back wall (expect 10 mm), retracted plate end to leg inner face (expect 15 mm), and flag any unintended interference between parts. - Print the bounding box of each part and the mass of the steel parts (density 7850 kg/m3). - Export: hook_unit.step, hook_unit.stl, and an isometric preview hook_unit.png. - Add short comments, and explain how to mirror the unit for the other side of the machine.

Parameters

NameValueRange
Retraction Stroke60 mm30 – 100
Finger Plate Length200 mm150 – 250
Finger Plate Width80 mm50 – 100
Finger Plate Thickness16 mm10 – 25
Nose Chamfer5 mm1 – 7
PU Pad Length25 mm15 – 50
PU Pad Thickness3 mm1 – 6
Guide Rail Length220 mm180 – 300
Frame Tube Section40 mm30 – 60
Frame Tube Wall3 mm2 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Water Purifier Lift Hook Mechanism - Free CAD Model (STEP, STL) | TextoCAD