Enclosures and housings
Water Chamber Revision Smaller 3mm Hose Ports
- Bounding box
- 47.2 × 18.2 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Updated only side ports: horizontal +Y barbs at X8/42, Z3.2, OD5.2mm, 6mm length, bore3.2mm, retaining cone up to6.2mm located 4.5mm from tip. Shell remains 8mm height, 1.6mm wall/top, 6.4mm cavity, two support ribs at X18/32 with 5mm lower flow gap. Same footprint.
Parameters
| Name | Value | Range |
|---|---|---|
| Body height | 8 mm | 7 – 10 |
| Wall thickness | 1.6 mm | 1.2 – 2.2 |
| Top slab thickness | 1.6 mm | 1.2 – 2.2 |
| Cavity height | 6.4 mm | 5.5 – 8 |
| Support rib thickness | 1.2 mm | 0.8 – 1.8 |
| Bottom opening below rib | 5 mm | 3 – 5.5 |
| Rib 1 X | 18 mm | 10 – 25 |
| Rib 2 X | 32 mm | 25 – 40 |
| Barb outer diameter | 5.2 mm | 4.5 – 7 |
| Bore diameter | 3.2 mm | 3.2 – 4.5 |
| Barb outward length | 6 mm | 5 – 8 |
| Retaining ridge diameter | 6.2 mm | 5.8 – 6.5 |
| Ridge cone length | 1 mm | 0.8 – 1.5 |
| Ridge location from tip | 4.5 mm | 3.5 – 5.5 |
| Port 1 X | 8 mm | 4 – 12 |
| Port 2 X | 42 mm | 38 – 45 |
| Port center Z | 3.2 mm | 2.5 – 4.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
Axial Turbine Rotor
Create a 3D-printable axial turbine rotor. Units mm. OD 34.15, hub OD 16, shaft hole Ø10. 12 equally spaced curved blades, radial height 9.075, chord 6.5, max thickness 0.65. Blade
