Enclosures and housings
Watch Case and Caseback
- Bounding box
- 38 × 38 × 10.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
add the lugs to the watch case
Parameters
| Name | Value | Range |
|---|---|---|
| Case diameter | 38 mm | 20 – 60 |
| Case height | 10 mm | 5 – 20 |
| Lug-to-lug length | 45.5 mm | 30 – 70 |
| Inner lug spacing | 20 mm | 10 – 30 |
| Front crystal diameter | 32 mm | 20 – 40 |
| Front crystal thickness | 1.5 mm | 0.5 – 3 |
| Crown tube hole diameter | 3.65 mm | 2 – 6 |
| Caseback diameter | 36 mm | 20 – 50 |
| Caseback thickness | 3 mm | 1.5 – 6 |
| Exhibition crystal diameter | 25.8 mm | 15 – 35 |
| Exhibition crystal thickness | 1.2 mm | 0.5 – 3 |
| Thread major diameter | 34 mm | 20 – 50 |
| Thread pitch | 0.75 mm | 0.25 – 2 |
| Sliding clearance per side | 0.2 mm | 0 – 0.5 |
| Lug width at root | 4.4 mm | 2 – 8 |
| Lug width at tip | 3.2 mm | 1.5 – 6 |
| Lug thickness at root | 5.6 mm | 2 – 10 |
| Lug thickness at tip | 2.4 mm | 1 – 6 |
| Lug root centre height | 5.2 mm | 2 – 10 |
| Lug tip centre height | 3.4 mm | 1 – 8 |
| Spring bar hole diameter | 1.6 mm | 1 – 3.5 |
| Blind hole depth from inner face | 1.8 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,