Brackets and mounts
Waste Bin Slide-In Cradle
- Bounding box
- 260.0 × 256.0 × 69.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create an open-top, open-front U-shaped slide-in cradle bracket designed to hold a removable 250 mm by 250 mm by 65 mm rectangular waste bin. The inner cavity dimensions are 252 mm wide (X-axis), 252 mm deep (Y-axis), and 65 mm tall (Z-axis) to allow 1 mm sliding clearance on the sides. The base plate is 4 mm thick, and the left, right, and back walls are 4 mm thick and 65 mm tall above the base plate, making the total outer dimensions 260 mm wide by 256 mm deep by 69 mm tall. The front side (along the Y = 0 face) is completely open so the 250 x 250 x 65 mm bin can slide smoothly in and out from the front. Add a 10 mm wide inward-facing top retention lip along the top inner edges of the left and right side walls (at Z = 69 mm, 4 mm thick) to keep the bin from tipping upward when pulled out. Keep all edges clean and flat without fillets.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Cavity Width | 252 mm | 100 – 500 |
| Inner Cavity Depth | 252 mm | 100 – 500 |
| Wall Height (above base) | 65 mm | 10 – 200 |
| Wall Thickness | 4 mm | 1 – 20 |
| Base Thickness | 4 mm | 1 – 20 |
| Retention Lip Width | 10 mm | 0 – 50 |
| Retention Lip Thickness | 4 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
