Brackets and mounts
Wall-Mounted Broom Holder
- Bounding box
- 84.0 × 50.0 × 44.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric, 3D-printable wall-mounted broom holder. Use millimeters. The backplate is 84 mm wide, 44 mm tall and 6 mm thick. Include two countersunk mounting holes with 60 mm center-to-center spacing. Add two symmetrical, flexible cantilever arms forming a front-entry grip for a cylindrical broom handle of 22–25 mm diameter. Maximum overall depth 50 mm. Add rounded edges and generous fillets at the arm roots to reduce stress concentrations. Design for FDM printing in PETG with a 0.4 mm nozzle, minimizing unsupported overhangs. Use a mechanically distinct original geometry, not a copy of an existing commercial holder. Generate editable parametric CAD and export STL and STEP files.
Parameters
| Name | Value | Range |
|---|---|---|
| Backplate Width | 84 mm | 60 – 120 |
| Backplate Height | 44 mm | 30 – 80 |
| Backplate Thickness | 6 mm | 4 – 12 |
| Mounting Hole Spacing | 60 mm | 30 – 80 |
| Mounting Hole Diameter | 4.5 mm | 3 – 6 |
| Countersink Diameter | 9 mm | 5 – 14 |
| Countersink Angle | 90 deg | 60 – 120 |
| Maximum Overall Depth | 50 mm | 35 – 70 |
| Arm Height | 12 mm | 6 – 25 |
| Grip Cavity Diameter | 25 mm | 18 – 35 |
| Grip Center Depth from Wall | 31 mm | 20 – 45 |
| Front Opening Width | 21 mm | 12 – 30 |
| Arm Radial Thickness | 4.5 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
