Mechanical parts
Wall Mount Gun Rack
- Bounding box
- 260 × 55 × 51 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
HOLA! si te adjunto el STL de una replica de arma podrías diseñar un soporte para ponerla en la pared?
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length | 260 mm | 100 – 500 |
| Plate height | 55 mm | 30 – 120 |
| Plate thickness | 6 mm | 3 – 12 |
| Hook centre spacing | 200 mm | 60 – 460 |
| Hook reach from wall | 45 mm | 20 – 120 |
| Hook width | 14 mm | 8 – 40 |
| Hook bar thickness | 12 mm | 6 – 30 |
| Up-turned retaining tip | 16 mm | 1 – 40 |
| Screw clearance hole diameter | 4.5 mm | 3 – 6 |
| Screw hole inset from plate ends | 20 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
