Brackets and mounts
View 1 Updated - Refractor Cutaway plus 3x Exploded Filter Cartridge with Labeled Layers
- Bounding box
- 990 × 535 × 270 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Edit 1 extended: unchanged refractor cutaway with highlighted filter cartridge and orange/blue rays, plus a large 3x-magnified exploded technical view of the removable cartridge in front: separate knurled holder halves with dowel pins and alignment key, protective coating, 16 individually labeled alternating TiO2/SiO2 layers (nanometre-scale, exaggerated for visibility) on a transparent glass substrate, and spring ring. Conceptual prototype, not a validated device.
Parameters
| Name | Value | Range |
|---|---|---|
| Objective aperture | 80 mm | 60 – 100 |
| Main tube length | 310 mm | 240 – 400 |
| Optical axis height above base | 140 mm | 125 – 170 |
| Glass substrate thickness | 6 mm | 4 – 10 |
| TiO2/SiO2 layer pairs | 8 mm | 4 – 8 |
| Displayed layer thickness | 1.2 mm | 0.6 – 2 |
| Spacing between layers | 18 mm | 14 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o