Enclosures and housings
VICEVERSE 3D Keychain
- Bounding box
- 65 × 28 × 3.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single solid, 3D-printable keychain with the exact text “VICEVERSE 3D” in bold, raised uppercase letters. Make the base a rounded rectangle, 65 mm wide, 28 mm tall, and 3 mm thick, with a flat back. Add a 5 mm through-hole on the left for a keyring, with at least 3 mm of material between the hole and the nearest edge. Place the text to the right of the hole. Make the letters 0.8 mm high above the base, with strokes at least 1 mm wide. Add a simple palm tree in relief on the right, keeping it separate from the lettering. If space is tight, omit the palm tree to keep the full name readable. Keep all raised details attached to the base. The keychain should print flat in PLA without supports on a Bambu Lab A1 with a 0.4 mm nozzle. Export the model as an STL in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 65 mm | 50 – 100 |
| Height | 28 mm | 20 – 60 |
| Base thickness | 3 mm | 2 – 6 |
| Corner radius | 4 mm | 1 – 10 |
| Keyring hole diameter | 5 mm | 3 – 8 |
| Hole center from left edge | 7 mm | 5.5 – 15 |
| Font size | 5 mm | 3 – 10 |
| Raised detail height | 0.8 mm | 0.4 – 2 |
| Text start from left edge | 12.5 mm | 10 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,