Enclosures and housings
Vertical Water Pump Assembly
- Bounding box
- 71.3 × 80.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of a compact vertical water pump based on the reference image. Use a cylindrical hollow body with a removable round top cover, a curved handle on top, one large horizontal outlet on the lower front-left side, and one smaller horizontal hose connection on the lower right side. Add an internal chamber with a central shaft and centrifugal impeller. Use realistic mechanical proportions, smooth cylindrical surfaces, 5 mm wall thickness, and rounded edges. Make all parts editable and manufacturable.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Outer Diameter | 120 mm | 80 – 200 |
| Body Height | 180 mm | 100 – 300 |
| Body Wall Thickness | 5 mm | 3 – 10 |
| Bottom Thickness | 5 mm | 3 – 10 |
| Top Flange Thickness | 10 mm | 5 – 20 |
| Bolt Count | 8 | 4 – 12 |
| Bolt Hole Diameter | 6.5 mm | 4 – 10 |
| Bolt Circle Diameter | 115 mm | 80 – 180 |
| Cover Diameter | 120 mm | 80 – 200 |
| Cover Thickness | 10 mm | 5 – 20 |
| Center Bore Diameter | 12.5 mm | 10 – 20 |
| O-Ring Groove Inner Radius | 56 mm | 40 – 70 |
| O-Ring Groove Outer Radius | 59 mm | 40 – 75 |
| O-Ring Groove Depth | 2 mm | 1 – 5 |
| Handle Insert Hole Diameter | 8 mm | 5 – 12 |
| Handle Insert Offset | 55 mm | 30 – 80 |
| Handle Radius | 55 mm | 30 – 80 |
| Handle Bar Diameter | 20 mm | 10 – 30 |
| Outlet Outer Diameter | 50 mm | 30 – 80 |
| Outlet Bore Diameter | 40 mm | 20 – 70 |
| Outlet Length | 45 mm | 20 – 80 |
| Outlet Flange Outer Diameter | 70 mm | 40 – 100 |
| Outlet Flange Thickness | 10 mm | 5 – 20 |
| Outlet Elevation | 60 mm | 20 – 150 |
| Outlet Azimuth (deg) | 135 degree | 0 – 360 |
| Hose Outer Diameter | 30 mm | 15 – 50 |
| Hose Bore Diameter | 20 mm | 10 – 40 |
| Hose Length | 35 mm | 15 – 60 |
| Hose Flange Outer Diameter | 50 mm | 25 – 70 |
| Hose Flange Thickness | 8 mm | 3 – 15 |
| Hose Elevation | 65 mm | 20 – 150 |
| Hose Azimuth (deg) | 330 degree | 0 – 360 |
| Impeller Outer Diameter | 80 mm | 30 – 150 |
| Impeller Hub Diameter | 20 mm | 10 – 40 |
| Impeller Height | 25 mm | 10 – 40 |
| Vane Count | 6 | 4 – 10 |
| Vane Thickness | 4 mm | 2 – 8 |
| Vane Sweep Angle (deg) | 30 degree | 0 – 60 |
| Impeller Bore Diameter | 12 mm | 8 – 20 |
| Shaft Diameter | 12 mm | 8 – 20 |
| Shaft Length | 170 mm | 100 – 250 |
| Shaft Protrusion Above Cover | 20 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox