Enclosures and housings
Vertical Smartphone Stand
- Bounding box
- 70.0 × 90.0 × 95.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple and sturdy 3D printable vertical smartphone stand. Design a compact cradle that holds a standard smartphone vertically in portrait orientation. The phone should rest on a bottom support ledge with a small front lip to prevent it from sliding forward. Add a centered cable opening at the bottom, large enough for a standard smartphone charging cable connector. The opening should be slightly raised so the charging cable does not bend sharply when connected to the phone. Use simple geometry, rounded edges and reinforced corners. Avoid unnecessary details and avoid thin fragile parts. The stand should be stable, strong and quick to 3D print with PETG. No supports should be required if possible. Make the design suitable for smartphones of different sizes.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 90 mm | 60 – 150 |
| Overall Depth | 70 mm | 50 – 120 |
| Base Thickness | 6 mm | 3 – 15 |
| Back Wall Thickness | 8 mm | 4 – 20 |
| Back Wall Height | 95 mm | 60 – 150 |
| Front Lip Thickness | 8 mm | 4 – 20 |
| Front Lip Height | 26 mm | 15 – 50 |
| Tray Floor Rise | 8 mm | 3 – 20 |
| Cable Opening Width | 14 mm | 8 – 30 |
| Corner / Edge Radius | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no