42.542.5100
Loading the interactive model…
Interactive 3D model of Vertical Rectangular Tube Mounting Block

Brackets and mounts

Vertical Rectangular Tube Mounting Block

3 views
Bounding box
42.5 × 42.5 × 100 mm
Engine
3D Printing B-rep
Parameters
4
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Create a vertical rectangular hollow tube mounting block, 100 mm tall along the Z-axis. The inner hollow cutout is exactly 30.5 mm by 30.5 mm with sharp 90-degree inner corners, passing completely through the full 100 mm height from top to bottom. The outer wall thickness is 6 mm on all four sides, making the total outer dimensions 42 mm by 42 mm by 100 mm. Drill a single 8.5 mm diameter through-hole centered horizontally and vertically (at Z = 50 mm) passing straight through the front and back walls along the Y-axis for an M8 bolt. Keep all exterior edges flat and clean without fillets.

Parameters

NameValueRange
Block height100 mm20 – 200
Inner size30.5 mm10 – 100
Wall thickness6 mm1 – 20
Bolt hole diameter8.5 mm3 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.