Enclosures and housings
Vertical Reactor Gas Space (with Two Side Pipes)
- Bounding box
- 19.6 × 10.2 × 78.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create one single solid body (no hollow inside, no walls, no wall thickness). This solid represents the gas space inside a vertical reactor. Build it as a revolved shape around the vertical center axis, with the bottom face at height 0 cm. Part 1: a cylinder with 5.08 cm diameter, from height 0 cm to 60 cm. Part 2: a cone from height 60 cm to 67 cm, widening from 5.08 cm diameter at the bottom to 10.16 cm diameter at the top. Part 3: a cylinder with 10.16 cm diameter, from height 67 cm to 78 cm. The bottom face is flat and has no pipe. It is the main inlet. The top face is flat and closed (no pipe). Add two solid side pipes, each 1.4 cm in diameter, joined to the main body as one solid (union). The pipes must overlap into the main body, so there is no gap between them and the body. Side inlet pipe: horizontal, center at 5 cm height, starting from the main tube and extending 6 cm outward. Side outlet pipe: horizontal, center at 74 cm height (4 cm below the top), starting from the top wide cylinder and extending 6 cm outward. Make everything one single merged solid. Do not add any extra parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Lower Cylinder Diameter | 5.08 cm | 1 – 30 |
| Lower Cylinder Height | 60 cm | 5 – 200 |
| Upper Cylinder Diameter | 10.16 cm | 1 – 40 |
| Cone (Transition) Height | 7 cm | 0.5 – 50 |
| Upper Cylinder Height | 11 cm | 0.5 – 100 |
| Side Pipe Outer Diameter | 1.4 cm | 0.2 – 8 |
| Side Pipe Outward Length | 6 cm | 1 – 40 |
| Side Inlet Center Height | 5 cm | 0.5 – 300 |
| Side Outlet Drop Below Top | 4 cm | 0.5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no