Brackets and mounts
Vector MP3 Player Case
- Bounding box
- 124 × 86 × 33 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
remove it all together inside, I dont want the 18650 holder in there. just make sure the dimensions are right so I can fit one in myself
Parameters
| Name | Value | Range |
|---|---|---|
| Case width X | 124 mm | 80 – 160 |
| Case depth Y | 86 mm | 60 – 120 |
| Case body height Z | 30 mm | 16 – 50 |
| Corner radius | 10 mm | 2 – 20 |
| Side wall thickness | 2.8 mm | 1.2 – 5 |
| Back floor thickness | 2.8 mm | 1.2 – 5 |
| Panel thickness | 3.5 mm | 2 – 6 |
| Display window width | 46 mm | 10 – 90 |
| Display window height | 28 mm | 8 – 60 |
| Display window X offset | -28 mm | -55 – 55 |
| Display window Y offset | 15 mm | -35 – 35 |
| Control hole diameter | 15 mm | 6 – 30 |
| Control hole X offset | 34 mm | -55 – 55 |
| Control hole Y offset | 22 mm | -35 – 35 |
| Screw clearance diameter | 3.4 mm | 2.5 – 6 |
| Battery bay clearance length | 78 mm | 55 – 100 |
| Battery bay clearance width | 22 mm | 16 – 35 |
| Battery bay Y position | -24 mm | -45 – 5 |
| USB-C slot width | 10 mm | 4 – 20 |
| USB-C slot height | 4.5 mm | 2 – 12 |
| USB-C slot Y position | -24 mm | -45 – 30 |
| USB-C slot centre height | 7 mm | 3 – 20 |
| Headphone jack hole diameter | 6.5 mm | 3.5 – 12 |
| Headphone jack X position | -28 mm | -55 – 55 |
| Headphone jack Z position - aligned with PCM5102A board | 12 mm | 4 – 25 |
| MicroSD slot width | 14 mm | 8 – 24 |
| MicroSD slot height | 3.2 mm | 1.5 – 6 |
| MicroSD slot X position | 14 mm | -55 – 55 |
| MicroSD slot Z position - aligned with PCB module | 11 mm | 4 – 25 |
| Power switch cutout length | 10.5 mm | 4 – 18 |
| Power switch cutout height | 5 mm | 2 – 12 |
| Power switch Y position | 16 mm | -35 – 35 |
| Power switch Z position | 16 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl