Brackets and mounts
Vebriqo Control Panel V1.0 Enclosure
- Bounding box
- 200 × 160 × 54.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 45
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable enclosure for **Vebriqo Control Panel V1.0**, a premium desktop wireless control panel. **Main dimensions:** - Width: 200 mm - Depth: 160 mm - Rear height: 50 mm - Front height: 30 mm - Top surface tilted approximately 8° toward the user - Wall thickness: 2.5 mm - Bottom thickness: 3 mm **Design:** - Minimalist, premium, matte-black appearance - Rounded corners - Hollow internal enclosure - Separate removable angled top panel - Separate bottom service cover - Hidden screw mounts **Component layout:** - 10 RGB buttons in 2 rows of 5 - 4 rotary potentiometers in one row - 1 OLED display, 0.96 inch, SSD1306 - Raspberry Pi Pico W - ADS1115 ADC module Create separate 3D parts for the enclosure, top panel and bottom cover. Include internal mounting space and cable routing. **Important:** Do not guess component hole diameters or mounting distances. Leave these dimensions adjustable because they will be measured later. Generate an actual editable 3D CAD model suitable for 3D printing, not just a visual concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 200 mm | 100 – 400 |
| Overall depth | 160 mm | 80 – 300 |
| Height at the front | 30 mm | 15 – 120 |
| Height at the rear | 50 mm | 15 – 150 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Outer corner radius | 12 mm | 2 – 30 |
| Top panel thickness | 3 mm | 1.5 – 8 |
| Total side clearance | 0.4 mm | 0.2 – 2 |
| Panel recess into body | 0.6 mm | 0.3 – 1.5 |
| Bottom cover thickness | 3 mm | 1.5 – 8 |
| Screw clearance dia | 3.4 mm | 2 – 6 |
| Counterbore dia | 6.5 mm | 3 – 12 |
| Counterbore depth | 1.6 mm | 0.5 – 4 |
| Screw offset X | 94 mm | 20 – 99 |
| Screw offset Y | 55 mm | 20 – 79 |
| Corner post dia | 9 mm | 5 – 18 |
| Post pilot hole dia | 3 mm | 2 – 5 |
| Post pilot hole depth | 12 mm | 5 – 25 |
| RGB button hole dia | 14 mm | 8 – 30 |
| Button spacing X | 28 mm | 15 – 45 |
| Button row 1 Y | 5 mm | -70 – 70 |
| Button row 2 Y | -28 mm | -70 – 70 |
| Potentiometer hole dia | 7.2 mm | 4 – 16 |
| Potentiometer spacing X | 40 mm | 15 – 60 |
| Potentiometer row Y | 52 mm | -70 – 70 |
| OLED window width | 21 mm | 10 – 60 |
| OLED window height | 11 mm | 5 – 40 |
| OLED centre X | 0 mm | -90 – 90 |
| OLED centre Y | -58 mm | -74 – 74 |
| OLED hole spacing X | 23.5 mm | 0 – 40 |
| OLED hole spacing Y | 23.5 mm | 0 – 40 |
| OLED hole dia | 2.4 mm | 1 – 5 |
| Pico W centre X | 0 mm | -90 – 90 |
| Pico W centre Y | 32 mm | -70 – 70 |
| Pico W hole spacing X | 46 mm | 10 – 60 |
| Pico W hole spacing Y | 17 mm | 5 – 40 |
| ADS1115 centre X | -62 mm | -90 – 90 |
| ADS1115 centre Y | 32 mm | -70 – 70 |
| ADS1115 hole spacing X | 20 mm | 5 – 40 |
| ADS1115 hole spacing Y | 12 mm | 5 – 40 |
| Standoff dia | 6 mm | 3 – 12 |
| Standoff height | 8 mm | 3 – 30 |
| Standoff pilot hole dia | 2.2 mm | 1 – 5 |
| Cable guide post dia | 4 mm | 2 – 10 |
| Cable guide post height | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
