Enclosures and housings
Vape Organizer
- Bounding box
- 254.3 × 125.0 × 32.3 mm
- Engine
- Precision B-rep
- Parameters
- 54
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design notes: one fused, support-free organizer at the exact requested 254 x 125 x 32 mm envelope, with origin at front-left-bottom. A 2 mm full-footprint base connects the three organizer zones into one solid. The tray has an R1 outside corner and a 4 mm inside corner radius to retain at least 2 mm wall near those corners. The battery roof uses a cubic smoothstep S-curve from (y=36,z=32) to (y=80,z=18), with horizontal tangents at both ends. All circular entries receive 0.5 mm, 45-degree chamfers; blind wells retain the specified flat floors. The final solid is intersected with an exact 254 x 125 x 32 mm box.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall X | 254 mm | 200 – 300 |
| Overall Y | 125 mm | 100 – 150 |
| Overall Z | 32 mm | 25 – 40 |
| Base and tray wall thickness | 2 mm | 1 – 4 |
| Outer vertical edge radius | 1 mm | 0.2 – 2 |
| Hole rim chamfer | 0.5 mm | 0.1 – 1 |
| Tray width | 77 mm | 50 – 90 |
| Tray inside corner radius for 2 mm minimum wall | 4 mm | 3.8 – 6 |
| Atomizer platform X start | 77 mm | 60 – 100 |
| Atomizer platform X end | 203.5 mm | 180 – 220 |
| Atomizer platform Y end | 95 mm | 80 – 105 |
| Atomizer platform top Z | 14 mm | 10 – 18 |
| Atomizer recess depth | 3 mm | 2 – 5 |
| Large recess diameter | 30.5 mm | 28 – 34 |
| End recess diameter | 26.5 mm | 24 – 29 |
| Regular recess diameter | 24.5 mm | 22 – 27 |
| Atomizer blind-hole diameter | 8.6 mm | 7 – 10 |
| Atomizer column 1 X | 96 mm | 85 – 105 |
| Atomizer column 2 X | 126.5 mm | 115 – 135 |
| Atomizer column 3 X | 154 mm | 145 – 165 |
| Atomizer column 4 X | 184.5 mm | 175 – 195 |
| Atomizer row 1 Y | 19 mm | 10 – 30 |
| Atomizer row 2 Y | 49.5 mm | 40 – 60 |
| Atomizer row 3 Y | 78 mm | 68 – 88 |
| Battery block X start | 203.5 mm | 190 – 220 |
| Battery block X end | 254 mm | 230 – 280 |
| Battery block Y end | 95 mm | 80 – 105 |
| Battery front top Z | 32 mm | 25 – 40 |
| Battery flat top end Y | 36 mm | 25 – 45 |
| Battery curve end Y | 80 mm | 70 – 90 |
| Battery rear top Z | 18 mm | 14 – 23 |
| Battery well diameter | 20 mm | 18 – 22 |
| Battery well bottom Z | 3 mm | 2 – 5 |
| Battery well column 1 X | 217.5 mm | 205 – 230 |
| Battery well column 2 X | 240.5 mm | 225 – 250 |
| Battery well row 1 Y | 13 mm | 5 – 20 |
| Battery well row 2 Y | 36 mm | 25 – 45 |
| Battery well row 3 Y | 59 mm | 48 – 68 |
| Battery well row 4 Y | 82 mm | 72 – 90 |
| Drip strip X start | 77 mm | 60 – 100 |
| Drip strip X end | 254 mm | 230 – 280 |
| Drip strip Y start | 95 mm | 80 – 105 |
| Drip strip Y end | 125 mm | 110 – 145 |
| Drip strip top Z | 9 mm | 7 – 12 |
| Drip hole depth | 7 mm | 5 – 9 |
| Drip hole diameter | 10.5 mm | 9 – 12 |
| Drip row first X | 90 mm | 80 – 100 |
| Drip row X pitch | 18 mm | 15 – 22 |
| Drip row 1 Y | 103 mm | 98 – 108 |
| Drip row 2 Y | 117 mm | 112 – 122 |
| Drip center row hole 1 X | 213.5 mm | 205 – 220 |
| Drip center row hole 2 X | 229.5 mm | 220 – 238 |
| Drip center row hole 3 X | 245.5 mm | 238 – 252 |
| Drip center row Y | 110 mm | 105 – 115 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
