Enclosures and housings
Vape Organizer
- Bounding box
- 254.0 × 125.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create one solid 3D-printable vape organizer, millimeters, 254 (X) x 125 (Y) x 32 (Z). Origin at front-left-bottom corner; X left to right, Y front to back, Z up. Flat bottom at z=0, no supports. 1) Open tray: x 0-77, y 0-125, height 32. Walls and floor 2 mm thick, open top. 2) Atomizer platform: x 77-203.5, y 0-95, top at z=14. 12 flat-bottom circular recesses, 3 mm deep, each with a concentric blind hole D8.6 down to z=2. Column X: 96, 126.5, 154, 184.5. Row Y: 19, 49.5, 78. Recess diameters: D30.5 at (96,19) and (184.5,19); D26.5 at (96,78) and (184.5,78); all other 8 are D24.5. 3) Battery block: x 203.5-254, y 0-95. Top is flat at z=32 for y 0-36, then a smooth S-curve down to z=18 at y=80, then flat to y=95. 8 vertical D20 holes with flat bottoms at z=3. X: 217.5, 240.5. Y: 13, 36, 59, 82. 4) Drip tip strip: x 77-254, y 95-125, top at z=9. 17 holes D10.5, 7 mm deep. Y=103 and Y=117: x = 90, 108, 126, 144, 162, 180, 198 (7 each). Y=110: x = 213.5, 229.5, 245.5. Finish: R1 fillet on outer vertical edges, 0.5 chamfer on hole rims, minimum wall 2 mm. Export as a single solid (STEP preferred).
Parameters
| Name | Value | Range |
|---|---|---|
| Overall X Length | 254 mm | 220 – 350 |
| Overall Y Depth | 125 mm | 100 – 200 |
| Overall Z Height | 32 mm | 25 – 60 |
| Tray Wall/Floor Thickness | 2 mm | 1 – 4 |
| Tray X Length | 77 mm | 40 – 120 |
| Atomizer/Battery X Start | 203.5 mm | 140 – 240 |
| Front Block Y Depth | 95 mm | 60 – 120 |
| Atomizer Platform Top Z | 14 mm | 8 – 30 |
| Atomizer Recess Depth | 3 mm | 1 – 10 |
| Atomizer Blind Hole Dia | 8.6 mm | 5 – 15 |
| Atomizer Hole Bottom Z | 2 mm | 1 – 5 |
| Battery Hole Dia | 20 mm | 10 – 30 |
| Battery Hole Bottom Z | 3 mm | 1 – 5 |
| Drip Tip Strip Top Z | 9 mm | 5 – 20 |
| Drip Tip Hole Dia | 10.5 mm | 5 – 20 |
| Drip Tip Hole Depth | 7 mm | 2 – 15 |
| Outer Vertical Fillet R | 1 mm | 0 – 3 |
| Hole Rim Chamfer | 0.5 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
