Enclosures and housings
Vape Accessory Organizer
- Bounding box
- 230.0 × 159.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable vape accessory organizer based on the attached reference image. Use millimeters and create a single solid, watertight CAD model. - **Front:** One row of vertical, blind holes, each exactly 11 mm in diameter, for vape drip tips. - **Center:** Exactly 15 vertical, blind cylindrical recesses, arranged in a 3×5 grid, each 24 mm in diameter, for vape atomizers. - **Left:** 8 vertical, blind battery slots arranged in a 2×4 grid, each 20 mm in diameter, for 18650 batteries. - **Right:** One enlarged, open-top rectangular compartment for vape mods. Make it noticeably larger than in the reference, with increased internal width and depth to fit larger devices. Preserve the reference layout, maintain even spacing and adequate wall thickness, and use a flat base with slightly rounded outer edges. Avoid intersecting holes and unnecessary decorative features. Ensure the model is dimensionally accurate, editable, and ready for 3D printing. Do not add text or logos.
Parameters
| Name | Value | Range |
|---|---|---|
| Drip Tip Hole Dia | 11 mm | 6 – 20 |
| Drip Tip Hole Count | 12 pcs | 1 – 24 |
| Drip Tip Hole Depth | 15 mm | 5 – 45 |
| Atomizer Recess Dia | 24 mm | 12 – 40 |
| Atomizer Columns (X) | 3 pcs | 1 – 6 |
| Atomizer Rows (Y) | 5 pcs | 1 – 8 |
| Atomizer Recess Depth | 28 mm | 8 – 45 |
| Battery Slot Dia | 20 mm | 14 – 30 |
| Battery Columns (X) | 2 pcs | 1 – 6 |
| Battery Rows (Y) | 4 pcs | 1 – 8 |
| Battery Slot Depth | 40 mm | 15 – 60 |
| Mod Pocket Width | 90 mm | 40 – 160 |
| Mod Pocket Depth (Y) | 136 mm | 60 – 200 |
| Mod Pocket Depth (Z) | 45 mm | 15 – 60 |
| Wall Thickness | 4 mm | 2 – 10 |
| Base Floor Thickness | 5 mm | 2 – 15 |
| Outer Corner Radius | 3 mm | 0 – 10 |
| Top Edge Round | 1.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no