Brackets and mounts
공 던지는 장치 v3 (최소 모터 고정부)
- Bounding box
- 200 × 216.7 × 33 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
공 던지는 장치 v3: 팔과 선 통로는 유지, 모터 고정부(holder)를 최소화(작은 바닥판, 낮고 짧은 벽, 낮은 뒷벽, 작은 걸림턱). 나사 없이 끼움 방식.
Parameters
| Name | Value | Range |
|---|---|---|
| Tile side | 100 mm | 60 – 150 |
| Tile thickness | 6 mm | 4 – 10 |
| Fit clearance per side | 0.3 mm | 0.1 – 0.6 |
| Dovetail neck width | 14 mm | 8 – 20 |
| Dovetail tip width | 22 mm | 14 – 32 |
| Dovetail length | 8 mm | 5 – 14 |
| Body size along the shaft axis | 38 mm | 30 – 45 |
| Body length | 40 mm | 35 – 45 |
| Body width | 20 mm | 16 – 26 |
| Shaft distance from the servo end | 10 mm | 6 – 14 |
| Shaft diameter | 6 mm | 4 – 8 |
| Shaft length above the case | 9 mm | 9 – 12 |
| Holder floor thickness | 5 mm | 4 – 10 |
| Holder wall thickness | 3 mm | 2 – 8 |
| End wall and catch height | 14 mm | 8 – 20 |
| End wall length from the back | 22 mm | 16 – 30 |
| Back wall height | 10 mm | 6 – 20 |
| Front catch length | 12 mm | 6 – 20 |
| Press-fit rib height | 0.6 mm | 0.2 – 1 |
| Peg width X | 5 mm | 3 – 8 |
| Peg length Y | 10 mm | 6 – 16 |
| Peg depth into tile | 4 mm | 2 – 5 |
| Peg offset from centre | 14 mm | 8 – 24 |
| Cable exit distance from servo bottom | 8 mm | 4 – 16 |
| Cable slot width | 10 mm | 6 – 16 |
| Ball diameter | 40 mm | 20 – 60 |
| Shaft to cup centre | 48 mm | 30 – 80 |
| Hub diameter | 14 mm | 10 – 20 |
| Hub thickness | 5 mm | 4 – 6 |
| Beam thickness | 3 mm | 2 – 5 |
| Cup shell thickness | 1.5 mm | 1.2 – 3 |
| Cup depth | 9 mm | 5 – 14 |
| Arm angle from rest, rotating upward | 0 deg | 0 – 170 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
