Enclosures and housings
Urban Algae Bioreactor Pillar
- Bounding box
- 600 × 339.1 × 1827.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a public urban liquid bioreactor street pillar based on geometric primitives. The structure is vertical, cylindrical, and modular, consisting of four main sections aligned on a central axis: 1. Lower Base Cylinder: • Shape: Solid vertical cylinder. • Details: Features a small rectangular maintenance hatch door on the front and horizontal ventilation slots/grilles near the very bottom. • Color/Material: Dark matte grey metallic. 2. Central Transparent Tank: • Shape: Clear, transparent vertical cylinder sitting directly on top of the base. • Content: Filled with a translucent green liquid (representing microalgae). Inside the liquid, there are small vertical bubble streams (can be modeled as thin internal patterned cylinders or particle arrays). • Lighting: Emits a bright green glow from the top and bottom rims into the liquid. 3. Upper Cap Cylinder: • Shape: Solid vertical cylinder sitting on top of the transparent tank. • Dimensions: Same diameter and dark grey material as the lower base, but shorter in height (approximately 1/3 of the base height). 4. Solar Panel Assembly (Top): • Stem: A thin, short cylindrical rod extending vertically from the center of the upper cap. • Panel Base: An oval/elliptical flat disc tilted at an approximate 30-45 degree angle relative to the horizontal plane. • Photovoltaic Surface: A grid-patterned solar cell texture embedded on the top surface of the tilted oval disc. Proportions and Alignment: • All main cylindrical components (Base, Tank, Cap) share the exact same outer diameter and are perfectly stacked vertically. • Approximate height ratio: Base (35%), Transparent Tank (50%), Upper Cap (15%) — excluding the solar panel. • Ensure clean topology and separate material IDs for the dark grey metal, transparent glass, glowing green liquid, and solar panel grid.
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 320 mm | 200 – 500 |
| Base height | 525 mm | 300 – 800 |
| Tank diameter | 320 mm | 200 – 500 |
| Tank height | 750 mm | 400 – 1000 |
| Tank wall thickness | 8 mm | 4 – 15 |
| Cap height | 225 mm | 100 – 400 |
| Stem diameter | 30 mm | 15 – 60 |
| Stem height | 200 mm | 100 – 400 |
| Liquid diameter | 305 mm | 200 – 400 |
| Liquid height | 700 mm | 300 – 900 |
| Bubble stream diameter | 5 mm | 2 – 10 |
| Bubble stream height | 600 mm | 300 – 800 |
| Bubble ring radius | 100 mm | 20 – 140 |
| Number of bubbles in ring | 8 mm | 4 – 16 |
| Panel major axis | 600 mm | 300 – 1000 |
| Panel minor axis | 400 mm | 200 – 800 |
| Panel thickness | 20 mm | 10 – 40 |
| Panel tilt angle | 35 deg | 0 – 45 |
| Grid groove width | 4 mm | 2 – 10 |
| Grid groove depth | 1.5 mm | 0.6 – 3 |
| Grid spacing | 40 mm | 20 – 100 |
| Hatch width | 100 mm | 60 – 200 |
| Hatch height | 160 mm | 80 – 300 |
| Hatch recess depth | 10 mm | 3 – 15 |
| Hatch center height | 300 mm | 100 – 450 |
| Vent groove height | 4 mm | 2 – 10 |
| Vent groove depth | 3 mm | 1 – 6 |
| First vent groove height | 40 mm | 20 – 100 |
| Spacing between vent grooves | 20 mm | 10 – 40 |
| Number of vent grooves | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no