Brackets and mounts
UR3e Flange Mounting Plate
- Bounding box
- 66 × 66 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
We're creating a mounting plate for a UR3e flange. It's a circular plate whose diameter is fixed at 63mm in diameter. It must have 8 holes for M6 screws arranged in a circular pattern with a diameter of 50mm. The plate should also have a 47mm hole through the center. The height of the plate should be adjustable, but let's start with 10mm. For safer mounting, I would also like to surround the top of the plate with a raised collar with the same height as the plate itself. We can raise by an adjustable amount, with a good first guess being 2mm. The width of the collar can also initially be set to 2mm, but be left adjustable. Note that since the entire collar is shifted upwards, this should naturally create a flange-extending boss at the bottom.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate outer diameter | 63 mm | 40 – 100 |
| Plate height | 10 mm | 5 – 30 |
| Central through hole diameter | 47 mm | 20 – 60 |
| Screw hole bolt circle diameter | 50 mm | 30 – 80 |
| M6 clearance hole diameter | 6.6 mm | 4 – 10 |
| Number of screw holes | 8 mm | 4 – 12 |
| Collar radial width | 2 mm | 1 – 6 |
| Collar raise above plate top | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o