Enclosures and housings
UPSIC-1205 Enclosure
- Bounding box
- 140 × 90 × 42.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
simple bottom and lid, 2 part housing for a bicker elektronik UPSIC-1205 printed circuit board. Bottom and lid are connected with screws. The board is 130mm long, 79.5mm wide and 30mm high, on every corner is a hole for a screw to attach the circuit board to the housing. the center of each hole is 5mm from each side of the corner. the holes are 3.5mm in diameter. the housing must have 4 stands with holes under each hole in the circuit board that can be used to attch the board to the bottom part of the housing with srews. the stands are 4mm high.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing length | 140 mm | 60 – 200 |
| Housing width | 90 mm | 40 – 160 |
| Housing height | 38 mm | 20 – 100 |
| Internal cavity length | 132 mm | 40 – 190 |
| Internal cavity width | 81.5 mm | 30 – 150 |
| Internal cavity depth | 35 mm | 10 – 95 |
| PCB standoff height | 4 mm | 2 – 10 |
| PCB standoff diameter | 7 mm | 4 – 12 |
| Standoff clearance hole | 3.5 mm | 2.8 – 5 |
| PCB envelope length | 130 mm | 40 – 190 |
| PCB envelope width | 79.5 mm | 30 – 150 |
| PCB envelope height | 30 mm | 10 – 80 |
| PCB board thickness | 2 mm | 1 – 4 |
| PCB mounting hole diameter | 3.5 mm | 2.8 – 5 |
| PCB hole inset from edges | 5 mm | 2 – 15 |
| Component block length | 112 mm | 40 – 180 |
| Component block width | 62 mm | 20 – 140 |
| Lid length | 140 mm | 60 – 200 |
| Lid width | 90 mm | 40 – 160 |
| Lid thickness | 3 mm | 1.2 – 8 |
| Lid screw clearance | 3.4 mm | 2.8 – 5 |
| Lid boss diameter | 6.5 mm | 4 – 12 |
| Lid boss pilot hole | 2.8 mm | 2 – 4 |
| Lid boss pilot depth | 8 mm | 3 – 15 |
| Lid screw X position | 64.5 mm | 30 – 69 |
| Lid screw Y position | 39.5 mm | 20 – 44 |
| M3 shaft diameter | 3 mm | 2.5 – 4 |
| M3 head diameter | 5.5 mm | 4 – 8 |
| M3 head height | 1.8 mm | 0.8 – 4 |
| PCB screw length | 8 mm | 6 – 12 |
| Lid screw length | 8 mm | 6 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no