Brackets and mounts
Upright Plate Fixture with Hooked Rods and Bracketed C-Clamps
- Bounding box
- 300.0 × 170.5 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
JUST I NEDD 2 CHANGES I WANT THE CLAMP BACK AND THE SIDE OF THE PLATE TO BE IN CONTACT FLIP IT 90 DEGREES AND I WNT THE BACK OF THE CLAP BE MOUNTED INTO A BRAKET THAT IS PART OD THE BASE THIS IS FIRST SECOND THE C SHAPE OF THE END OF THE ROD I WANT YOU TO ROTATE THEM ALSO 90 DEGREES
Parameters
| Name | Value | Range |
|---|---|---|
| Rod Spacing (gap) | 90 mm | 20 – 300 |
| Rod Angle | 10 deg | 0 – 45 |
| Plate Length | 300 mm | 100 – 600 |
| Plate Height | 200 mm | 80 – 400 |
| Plate Thickness | 10 mm | 5 – 30 |
| Corner Radius | 4 mm | 0 – 12 |
| Adapter Hole Dia | 9 mm | 3 – 20 |
| Adapter Hole Spacing | 160 mm | 60 – 300 |
| Clamp Hole Spacing | 26 mm | 10 – 60 |
| Clamp Hole Dia | 9 mm | 3 – 20 |
| Clamp Spacing | 160 mm | 60 – 300 |
| Bracket Wall Thickness | 4 mm | 2 – 15 |
| Bracket Protrusion | 34 mm | 10 – 80 |
| Clamp Slide Clearance | 0.5 mm | 0 – 5 |
| Rod Diameter | 20 mm | 6 – 60 |
| Rod Length | 120 mm | 30 – 300 |
| Tube Diameter (Hook ID) | 40 mm | 10 – 120 |
| Hook Clearance | 1.5 mm | 0.2 – 5 |
| Hook Wall Thickness | 6 mm | 2 – 20 |
| Hook Width | 12 mm | 4 – 40 |
| Hook Rotation | 90 deg | 0 – 180 |
| Adapter Length | 60 mm | 20 – 150 |
| Adapter Width | 50 mm | 20 – 150 |
| Adapter Thickness | 10 mm | 3 – 30 |
| Clamp Height | 120 mm | 60 – 250 |
| Clamp Base Length | 70 mm | 30 – 150 |
| Clamp Base Width | 50 mm | 20 – 120 |
| Clamp Spine Width | 60 mm | 20 – 120 |
| Clamp Spine Hole Height | 90 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
