Brackets and mounts
Universal Adjustable Container Holder
- Bounding box
- 300.0 × 200.0 × 74.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D CAD model of a Universal Adjustable Container Holder designed to securely hold containers of different sizes during transportation. Design requirements: Base Plate: A rectangular flat base plate with four mounting holes at the corners. Sliding Rails: Two parallel rails mounted on the base plate to guide the movement of adjustable clamps. Sliding Clamps: Four adjustable clamps that can slide along the rails to accommodate containers of different widths. Locking Mechanism: Simple screw-locking knobs or bolts to lock the sliding clamps in the required position. Container Support: Vertical supporting surfaces on the clamps to prevent containers from slipping during transportation. CAD design specifications: Keep the design simple and suitable for a beginner-level engineering project. Use basic geometric shapes. Make all components separate but assembled together. Ensure the clamps can slide along the rails. Use realistic dimensions in millimetres. Suggested base plate dimensions: 300 mm × 200 mm × 8 mm. Suggested adjustable container width range: 80 mm to 250 mm. Avoid unnecessary complex features. Ensure the design is mechanically practical and manufacturable. Output requirements: Generate a complete 3D assembly. Export the model in STEP (.STEP or .STP) format. Ensure all solid bodies are properly modelled and suitable for further editing in CAD software.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 300 mm | 150 – 600 |
| Base Width | 200 mm | 100 – 400 |
| Base Thickness | 8 mm | 4 – 25 |
| Mounting Hole Dia | 8 mm | 3 – 16 |
| Mounting Hole Inset | 20 mm | 8 – 60 |
| Rail Length | 260 mm | 100 – 550 |
| Rail Width | 20 mm | 10 – 40 |
| Rail Height | 12 mm | 6 – 25 |
| Guide Slot Width | 8 mm | 4 – 18 |
| Rail Centre Spacing | 120 mm | 40 – 300 |
| Clamp Length (X) | 40 mm | 20 – 100 |
| Clamp Width (Y) | 30 mm | 16 – 80 |
| Clamp Base Height | 16 mm | 10 – 40 |
| Support Face Height | 50 mm | 10 – 150 |
| Support Wall Thickness | 8 mm | 3 – 20 |
| Clamp X Offset | 60 mm | 20 – 200 |
| Knob Head Dia | 20 mm | 8 – 40 |
| Knob Head Thickness | 8 mm | 3 – 20 |
| Knob Shaft Dia (M8) | 8 mm | 3 – 16 |
| Knob Overall Length | 25 mm | 10 – 60 |
| Sliding Fit Clearance | 0.2 mm | 0.05 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
