Brackets and mounts
Unistrut Combiner Pole Bracket
- Bounding box
- 670.0 × 200.0 × 141.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
i need a unistrut frame mounted on a 89.9mm diameter CHS gantry pole, to support three Andrew E14F06P09 combiners
Parameters
| Name | Value | Range |
|---|---|---|
| Pole OD | 89.9 mm | 50 – 200 |
| Plate thickness | 10 mm | 5 – 20 |
| Groove depth | 5 mm | 2 – 10 |
| Plate width (Y) | 200 mm | 120 – 300 |
| Plate height (Z) | 100 mm | 60 – 200 |
| U‑bolt dia | 8 mm | 6 – 12 |
| U‑bolt hole dia | 9 mm | 6.5 – 13 |
| U‑bolt hole Y spacing | 140 mm | 80 – 200 |
| U‑bolt hole Z offset | 25 mm | 10 – 50 |
| Channel width | 41 mm | 30 – 60 |
| Channel height | 41 mm | 30 – 60 |
| Wall thickness | 2.5 mm | 1.5 – 4 |
| Lip width | 10 mm | 6 – 15 |
| Slot width | 22 mm | 16 – 30 |
| Rail length | 660 mm | 200 – 1500 |
| Rail spacing (ctr‑ctr) | 100 mm | 60 – 200 |
| Number of combiners | 3 | 1 – 8 |
| Combiner length | 200 mm | 100 – 400 |
| Combiner spacing | 20 mm | 0 – 100 |
| End hole offset | 20 mm | 5 – 50 |
| Mounting hole dia | 5.5 mm | 4 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o