Enclosures and housings
Ultra-Slim Square Smartwatch Case
- Bounding box
- 44 × 61 × 8.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Ultra-slim modern square smartwatch front bezel and outer case shell, 44mm wide by 50mm tall and 8.2mm thick, 6mm rounded corners, chamfered sleek top bezel edge. Centered on the top face is a 30.2mm by 35.2mm rectangular screen window with a 1.6mm deep recessed inner bezel shelf for a flush glass touchscreen. On the right outer side wall, add a subtle 16mm by 4mm pill-shaped tactile finger groove with a thin 0.8mm wall behind it for capacitive touch sensing. On the left outer side wall, add two clean 2.8mm circular button holes spaced 14mm apart. Integrated curved top and bottom watch lugs for a 22mm strap with 1.6mm pin holes. Open hollow bottom cavity for a snap-fit backplate, clean matte anodized finish, watertight
Parameters
| Name | Value | Range |
|---|---|---|
| Case width | 44 mm | 20 – 80 |
| Case height | 50 mm | 20 – 80 |
| Case thickness | 8.2 mm | 3 – 20 |
| Corner radius in plan | 6 mm | 1 – 15 |
| Top bezel chamfer | 1.2 mm | 0.2 – 3 |
| Side wall thickness | 2.4 mm | 1.2 – 6 |
| Top plate thickness | 2.4 mm | 1.2 – 6 |
| Screen recess width | 30.2 mm | 10 – 60 |
| Screen recess height | 35.2 mm | 10 – 60 |
| Screen corner radius | 2 mm | 0 – 8 |
| Glass shelf depth | 1.6 mm | 0.4 – 4 |
| Shelf ledge width | 0.8 mm | 0.4 – 3 |
| Groove length | 16 mm | 6 – 30 |
| Groove height | 4 mm | 1 – 7 |
| Wall left behind groove | 0.8 mm | 0.5 – 2 |
| Button hole diameter | 2.8 mm | 1 – 6 |
| Button hole spacing | 14 mm | 4 – 30 |
| Button hole height | 4 mm | 1 – 7 |
| Strap width between lugs | 22 mm | 10 – 30 |
| Lug ear thickness | 3 mm | 1.5 – 6 |
| Lug protrusion | 5.5 mm | 2 – 12 |
| Spring bar hole diameter | 1.6 mm | 0.8 – 3 |
| Backplate thickness | 1.6 mm | 0.8 – 4 |
| Fit clearance per side | 0.1 mm | 0.05 – 0.4 |
| Snap bead height | 0.35 mm | 0.2 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
