Enclosures and housings
U-Shaped Manual Lift Skid with Bottle Jacks and Screw Jack
- Bounding box
- 2400.0 × 1640.0 × 510.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
A heavy-duty industrial 3D model of a U-shaped manual lift skid with dimensional markings in mm. Total length 2400mm, total width 1500mm, made of thick UPN 140 steel channels. At the rear section, include two vertical 5-ton bottle jacks linked together with a dual-handle rod. At the center back, add a heavy horizontal mechanical screw jack with a 700mm length and a square-thread handle. The bottom of the steel frame is flat and lined with a solid 20mm Teflon layer. Engineering prototype style
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 2400 mm | 1500 – 3000 |
| Frame Width | 1500 mm | 900 – 2000 |
| Channel Height (UPN 140) | 140 mm | 80 – 220 |
| Channel Flange Width | 60 mm | 40 – 110 |
| Marking Pitch | 200 mm | 50 – 500 |
| Marking Width | 6 mm | 2 – 20 |
| Teflon Layer Thickness | 20 mm | 5 – 60 |
| Jack Base Diameter | 200 mm | 120 – 300 |
| Jack Base Height | 40 mm | 20 – 90 |
| Jack Body Diameter | 160 mm | 100 – 250 |
| Jack Body Height | 170 mm | 100 – 280 |
| Jack Collapsed Height | 250 mm | 150 – 420 |
| Jack Ram Diameter | 60 mm | 30 – 120 |
| Jack Ram Extension | 100 mm | 0 – 200 |
| Linkage Rod Diameter | 30 mm | 15 – 60 |
| Linkage Rod Length | 1400 mm | 1320 – 1800 |
| Handle Grip Diameter | 35 mm | 20 – 70 |
| Handle Grip Length | 220 mm | 80 – 450 |
| Screw Jack Length | 700 mm | 300 – 1200 |
| Screw Jack Body Diameter | 120 mm | 60 – 250 |
| Square-Thread Turns | 9 pcs | 3 – 20 |
| Handle Bar Section | 25 mm | 15 – 60 |
| Handle Length | 400 mm | 200 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no