Brackets and mounts
U-Shaped Desk Edge Buffer Clamp
- Bounding box
- 40 × 60 × 26.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
A U-shaped desk buffer and edge clamp for a 16mm thick tabletop. Overall dimensions: 60mm long, 40mm wide, and 26mm high. It features a horizontal rectangular slot (groove) that is 16.5mm wide and 30mm deep, designed to slide onto the edge of a 16mm table. The back wall acts as a 30mm buffer/spacer to hold the desk away from the wall for cable management. The top and bottom walls around the slot are 5mm thick each. Add a 1.5mm fillet to all sharp outer corners and edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall depth, front to back | 60 mm | 30 – 150 |
| Overall width along desk edge | 40 mm | 20 – 100 |
| Slot depth from open front | 30 mm | 10 – 120 |
| Slot height for tabletop | 16.5 mm | 10 – 30 |
| Wall above slot | 5 mm | 2 – 10 |
| Wall below slot | 5 mm | 2 – 10 |
| Outer edge fillet radius | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o