Brackets and mounts
U-shaped bracket
- Bounding box
- 85.0 × 30.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a U-shaped bracket. Start with a flat rectangular base plate that is 85mm wide, 30mm deep, and 5mm thick. On the far left edge, add a vertical rectangular wall that is 5mm thick, 30mm deep, and 70mm tall. On the far right edge, add an identical vertical wall that is 5mm thick, 30mm deep, and 70mm tall. Cut an 8.2mm diameter hole completely through the center of the bottom plate, surrounded by four 3.2mm holes on a 16mm diameter circular pattern. On the left vertical wall, exactly 50mm up from the inner floor, cut a 22.5mm diameter hole, surrounded by four 3.2mm holes spaced 31.04mm apart in a square. On the right vertical wall, directly opposite the left wall's center hole, cut a 22mm diameter hole.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate width | 85 mm | 50 – 150 |
| Base plate depth | 30 mm | 20 – 100 |
| Base plate thickness | 5 mm | 2 – 12 |
| Wall thickness | 5 mm | 2 – 10 |
| Wall depth | 30 mm | 20 – 100 |
| Wall height | 70 mm | 30 – 150 |
| Bottom center hole diameter | 8.2 mm | 1 – 20 |
| Bottom small hole diameter | 3.2 mm | 1 – 10 |
| Bottom small hole pattern diameter | 16 mm | 8 – 25 |
| Left wall center hole diameter | 22.5 mm | 5 – 26 |
| Left wall center hole height from inner floor | 50 mm | 15 – 58 |
| Left wall small hole diameter | 3.2 mm | 1 – 10 |
| Left wall small hole square diagonal spacing | 31.04 mm | 10 – 36 |
| Right wall center hole diameter | 22 mm | 5 – 26 |
| Right wall center hole height from inner floor | 50 mm | 15 – 58 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl