Enclosures and housings
U-Channel Mounting Bracket
- Bounding box
- 225 × 38 × 118 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Remove the two existing holes from the wide main back plate so that the wide plate is completely solid and uninterrupted. Instead, drill two 8.5 mm diameter through-holes through BOTH of the two narrow perpendicular side flanges (the small lips). Align the holes across both side flanges, spaced 185 mm apart center-to-center along the 225 mm length (20 mm from each end), and centered on the width of the narrow side flanges (15 mm from the inner corner). Keep all other dimensions and fillets unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Total length | 225 mm | 100 – 350 |
| Outer width | 118 mm | 50 – 200 |
| Total height | 38 mm | 20 – 100 |
| Top deck thickness | 6 mm | 3 – 15 |
| Side wall thickness | 6 mm | 3 – 15 |
| Outer top edge fillet radius | 4 mm | 0 – 10 |
| M8 bolt hole diameter | 8.5 mm | 3 – 15 |
| Hole center-to-center spacing | 185 mm | 50 – 300 |
| Hole Z offset below inner deck | 15 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
