Brackets and mounts
U-Channel Mounting Bracket
- Bounding box
- 225 × 38 × 118 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a sturdy 3D-printable U-channel mounting bracket (inverted U-shape bridge) designed to slide over two parallel rectangular bicycle rack rails. Outer dimensions: 225 mm long, 118 mm wide, and 38 mm tall. The top flat deck is 6 mm thick, and the two vertical side walls are each 6 mm thick and extend 32 mm downward from the top deck, creating an inner channel width of 106 mm and inner height of 32 mm. Round the top outer lengthwise edges with a 4 mm fillet. Through both vertical side walls, drill two horizontal 8.5 mm diameter through-holes (for M8 bolts) aligned across both sides: spaced 185 mm apart center-to-center along the 225 mm length (positioned 20 mm from each end) and centered vertically on the side walls at 16 mm below the inner top surface. Clean manifold geometry, completely flat top deck, ready for FDM 3D printing upside-down (top deck flat on the build plate) without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Total length | 225 mm | 100 – 350 |
| Outer width | 118 mm | 50 – 200 |
| Total height | 38 mm | 20 – 100 |
| Top deck thickness | 6 mm | 3 – 15 |
| Side wall thickness | 6 mm | 3 – 15 |
| Outer top edge fillet radius | 4 mm | 0 – 10 |
| M8 bolt hole diameter | 8.5 mm | 3 – 15 |
| Hole center-to-center spacing | 185 mm | 50 – 300 |
| Hole Z offset below inner deck | 16 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
