34.034.079.7
Loading the interactive model…
Interactive 3D model of Type-M Heavy-Duty Oxy-Fuel Heating Nozzle

Fittings and adapters

Type-M Heavy-Duty Oxy-Fuel Heating Nozzle

1 views
Bounding box
34.0 × 34.0 × 79.7 mm
Engine
Precision B-rep
Parameters
26
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Create a 3D CAD model and export it as a STEP file for an extra-large custom heavy-duty heating nozzle (Type-M oxy-fuel cutting torch mixing head standard) optimized for metal melting and crucible work, based on the reference technical drawing with these upgraded dimensions: 1. Overall Length & Structure: - Total length: 75.0 mm to 80.0 mm. - Material configuration: Heavy-duty Copper head (larger thermal mass) and Brass hex body & stem. 2. Upgraded Copper Head (Jumbo Heating Tip): - Front Copper Head Diameter: Enlarged to Ø 32.0 mm - Ø 35.0 mm (jumbo size for maximum heating output and melting crucibles). - Flame Hole Configuration: High-density concentric multi-holes layout (approx. 19 to 25 flame ports) with Ø 1.2 mm to Ø 1.5 mm holes for high-volume oxygen-LPG/acetylene combustion. 3. Body & Hex Dimensions: - Main Hex Body: Outer diameter Ø 32.0 mm, length 25.0 mm, with 27.0 mm or 30.0 mm AF (Across Flats). - Secondary Hex Body / Main Stem section: Ø 24.0 mm with a length of 30.0 mm. - Connection Stem (rear mating side): Outer diameter Ø 16.0 mm, length 18.0 mm. 4. Threads & Internal Taper (Type-M Standard Fit): - Standard Type-M Thread: M16 x 1.5 - 6g, Pitch 1.5 mm, matching standard industrial Type-M oxy-fuel cutting torch mixing heads. - Internal Taper Seat Angle: 120° transition cone leading to the internal bore for a secure, gas-tight seal. Ensure precise symmetry, concentric alignment, and correct seating angles so it fits perfectly into a standard Type-M cutting torch mixing head while featuring a much larger copper thermal head for metal smelting.

Parameters

NameValueRange
Copper Head Diameter34 mm32 – 35
Copper Head Thickness6 mm4 – 10
Port Plate Face Thickness2 mm1 – 4
Plenum Wall Thickness2.5 mm1.5 – 4
Head Outer Chamfer0.8 mm0.2 – 2
Center Port Diameter1.4 mm1 – 2
Inner Ring Hole Diameter1.4 mm1 – 2
Inner Ring Hole Count64 – 10
Inner Ring Circle Diameter9 mm6 – 12
Mid Ring Hole Diameter1.4 mm1 – 2
Mid Ring Hole Count86 – 12
Mid Ring Circle Diameter17.5 mm14 – 20
Outer Ring Hole Diameter1.4 mm1 – 2
Outer Ring Hole Count108 – 16
Outer Ring Circle Diameter26 mm22 – 29
Connection Thread Length18 mm14 – 22
Thread Major Diameter (M16)16 mm14 – 18
Thread Pitch1.5 mm1 – 2
Stem Length30 mm20 – 40
Stem Diameter24 mm20 – 28
Hex Body Length25 mm20 – 32
Hex Across Flats (AF)27 mm24 – 30
Hex Face Chamfer1 mm0.3 – 2
Internal Gas Bore Diameter7 mm4 – 9
Mixing Chamber Diameter14 mm10 – 18
Internal Seating Cone Angle120 deg90 – 140

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Type-M Heavy-Duty Oxy-Fuel Heating Nozzle - Free CAD Model (STEP, STL) | TextoCAD