Enclosures and housings
Two-Zone Tapered Reservoir
- Bounding box
- 133.1 × 91.4 × 150.7 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the reservoir into a compact two-zone design. Overall concept: - Upper wide dry/service chamber. - Lower narrow liquid chamber. - No internal mechanisms. Dimensions: - Overall height: 150 mm. - Upper outer section: 130 mm wide × 90 mm deep. - Lower liquid section: 115 mm wide × 24 mm deep. - Lower liquid section height: 100 mm. - Transition to the wider upper section above this level. - Uniform wall thickness: 5 mm. Top: - Large open top. - Keep a flat perimeter rim for a future removable lid. Interface face: - Create exactly two horizontal through-slots. - Each slot: 103 mm wide × 3.8 mm high. - Vertical center-to-center distance: 16 mm. - Both slots must be entirely inside the upper dry zone. - Center both slots horizontally. Bottom: - Create one 12 mm diameter drain hole at the lowest point. Use smooth transitions between the narrow lower chamber and wider upper chamber. Keep the lower chamber suitable for approximately 150 mL operating liquid volume. Do not create rollers, shafts, bearings, belt, motor, supports, lid, valve or scraper. Generate one hollow solid reservoir body only.
Parameters
| Name | Value | Range |
|---|---|---|
| Upper Chamber Length (X) | 130 mm | 60 – 300 |
| Upper Chamber Depth (Y) | 90 mm | 40 – 250 |
| Lower Chamber Length (X) | 115 mm | 40 – 280 |
| Lower Chamber Depth (Y) | 24 mm | 12 – 200 |
| Lower Chamber Height | 100 mm | 20 – 360 |
| Overall Height | 150 mm | 60 – 400 |
| Wall Thickness | 5 mm | 2 – 15 |
| Internal Corner Radius | 4 mm | 0 – 6 |
| Slot Width | 103 mm | 20 – 250 |
| Slot Height | 3.8 mm | 1 – 20 |
| Slot Centre Spacing | 16 mm | 5 – 60 |
| Upper Slot Height (Z) | 125 mm | 70 – 145 |
| Drain Hole Diameter | 12 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no