Brackets and mounts
Two-Wheeled Articulated Balancing Robot
- Bounding box
- 189.8 × 100 × 243.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
$fn=48; // Two-wheeled articulated balancing robot // Units: mm // PARAMETERS body_w=100; body_d=75; body_h=130; wheel_r=50; wheel_w=25; wheel_spacing=130; leg_w=25; leg_d=22; upper_len=75; lower_len=85; joint_r=17; // ASSEMBLY union(){ // Central electronics chassis translate([0,0,160]) difference(){ cube([body_w,body_d,body_h],center=true); cube([body_w-5,body_d-5,body_h-5],center=true); } // Electronics mounting plate translate([0,0,230]) difference(){ cube([90,65,4],center=true); for(x=[-29,29],y=[-24,24]) translate([x,y,0]) cylinder(h=8,r=1.5,center=true); } // Battery compartment translate([0,0,110]) cube([65,55,25],center=true); // Left and right leg assemblies for(s=[-1,1]){ translate([s*wheel_spacing/2,0,105]){ // Upper leg translate([0,0,upper_len/2]) leg(upper_len); // Inverted knee joint translate([0,0,0]) knee(); // Lower leg translate([0,0,-lower_len/2-15]) leg(lower_len); // Motor housing translate([0,0,-lower_len-30]) motor_mount(); // Wheels translate([0,0,-lower_len-75]) wheel(); } } } // LEG SEGMENT module leg(l){ difference(){ translate([0,0,-l/2]) cube([leg_w,leg_d,l],center=true); translate([0,0,-l/2]) cube([leg_w-8,leg_d-8,l-15],center=true); } for(z=[0,-l]) translate([0,0,z]) rotate([90,0,0]) cylinder(h=leg_d+5,r=5,center=true); } // ARTICULATED KNEE module knee(){ difference(){ sphere(r=joint_r); rotate([90,0,0]) cylinder(h=55,r=5,center=true); } // Spring attachment points for(s=[-1,1]) translate([0,s*18,0]) rotate([90,0,0]) difference(){ cylinder(h=8,r=9,center=true); cylinder(h=12,r=3,center=true); } } // MOTOR MOUNT module motor_mount(){ difference(){ cube([50,40,30],center=true); cylinder(h=45,r=8,center=true); for(x=[-16,16],y=[-12,12]) translate([x,y,0]) cylinder(h=40,r=2.5,center=true); } } // WHEEL module wheel(){ difference(){ union(){ rotate([90,0,0]) cylinder(h=wheel_w,r=wheel_r,center=true); rotate([90,0,0]) cylinder(h=wheel_w+8,r=18,center=true); } rotate([90,0,0]) cylinder(h=wheel_w+12,r=5,center=true); } }
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis width | 100 mm | 40 – 200 |
| Chassis depth | 75 mm | 30 – 150 |
| Chassis height | 130 mm | 40 – 250 |
| Chassis bottom height above bed | 110 mm | 50 – 300 |
| Chassis wall thickness | 5 mm | 2 – 10 |
| Electronics plate width | 90 mm | 40 – 180 |
| Electronics plate depth | 65 mm | 30 – 140 |
| Electronics plate thickness | 4 mm | 2 – 10 |
| Mounting hole diameter | 3.4 mm | 2 – 6 |
| Mounting hole inset from edge | 8 mm | 4 – 20 |
| Battery box width | 65 mm | 30 – 120 |
| Battery box depth | 55 mm | 25 – 100 |
| Battery box height | 25 mm | 10 – 60 |
| Battery box wall thickness | 2.5 mm | 1.2 – 6 |
| Leg segment width | 25 mm | 10 – 50 |
| Leg segment depth | 22 mm | 10 – 50 |
| Upper leg length | 75 mm | 30 – 150 |
| Lower leg length | 85 mm | 30 – 150 |
| Spherical knee diameter | 34 mm | 20 – 60 |
| Motor mount width along axle | 30 mm | 15 – 60 |
| Motor mount fore-aft length | 50 mm | 20 – 100 |
| Motor mount height | 40 mm | 20 – 80 |
| Wheel diameter | 100 mm | 40 – 200 |
| Wheel tire width | 25 mm | 10 – 60 |
| Wheel center spacing | 160 mm | 80 – 300 |
| Axle diameter | 10 mm | 4 – 20 |
| Wheel hub diameter | 36 mm | 10 – 60 |
| Sliding fit clearance per side | 0.2 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
