Enclosures and housings
Two Studios & Pools Residential Complex
- Bounding box
- 28000 × 10000 × 10800 mm
- Engine
- 3D Printing B-rep
- Parameters
- 37
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
{ "project": "Complexe Résidentiel - Deux Studios & Piscines", "units": "meters", "global_dimensions": { "length": 28.0, "width": 10.0, "levels": 3, "level_height": 3.0 }, "zones": [ { "name": "Studio_1_Vert", "location": "Front Zone", "dimensions": {"length": 16.0, "width": 10.0}, "elements": [ {"type": "Garage", "position": "Front-Right", "access": "Main Street Entrance"}, {"type": "Master Bedroom", "dimensions": {"length": 4.0, "width": 3.5}}, {"type": "Ensuite Bathroom", "dimensions": {"length": 2.8, "width": 2.0}, "features": ["Shower", "WC"]}, {"type": "Kitchenette Open Space", "features": ["Living area integration"]}, {"type": "Private Pool", "dimensions": {"length": 7.0, "width": 3.0}, "placement": "Embedded in green zone"}, {"type": "Staircase Cage", "features": ["Fully enclosed on all upper levels", "Separated from living space"]} ], "windows": "Bilateral windows on both left and right side facades" }, { "name": "Studio_2_Orange", "location": "Rear Zone", "dimensions": {"length": 12.0, "width": 10.0}, "elements": [ {"type": "Master Bedroom", "dimensions": {"length": 3.5, "width": 3.5}}, {"type": "Bathroom", "dimensions": {"length": 2.5, "width": 2.8}, "features": ["Shower", "WC"]}, {"type": "Kitchenette Open Space", "features": ["Living area integration"]}, {"type": "Private Pool", "dimensions": {"length": 7.0, "width": 3.0}, "placement": "Embedded in orange zone"}, {"type": "Access Passage", "features": ["Connected via Studio 1 staircase zone"]}, {"type": "Staircase Cage", "features": ["Fully enclosed and isolated"]} ], "windows": "Bilateral windows on both side facades" } ], "topography": { "ground_offset": "Strict compliance with natural slope and terrain level shifts (0.5m to 2m foundation drops for pools and lower levels)" } }
Parameters
| Name | Value | Range |
|---|---|---|
| Site length | 28000 mm | 20000 – 40000 |
| Site width | 10000 mm | 6000 – 20000 |
| Number of levels | 3 mm | 1 – 5 |
| Level height | 3000 mm | 2000 – 4000 |
| Plinth thickness | 1800 mm | 500 – 3000 |
| Sliding fit clearance | 0.2 mm | 0 – 1 |
| Window width | 1200 mm | 400 – 3000 |
| Window height | 1600 mm | 400 – 2500 |
| Window recess depth | 150 mm | 20 – 400 |
| Window edge margin | 1000 mm | 200 – 3000 |
| Windows per side per level | 3 mm | 2 – 6 |
| Studio 1 length | 16000 mm | 6000 – 30000 |
| Studio 1 width | 10000 mm | 4000 – 20000 |
| Studio 2 length | 12000 mm | 6000 – 30000 |
| Studio 2 width | 10000 mm | 4000 – 20000 |
| Garage length | 6000 mm | 3000 – 10000 |
| Garage width | 6000 mm | 3000 – 10000 |
| Garage height | 3000 mm | 2000 – 4000 |
| Garage wall thickness | 200 mm | 80 – 500 |
| Garage door width | 5000 mm | 1000 – 9000 |
| Garage door height | 2400 mm | 1000 – 3000 |
| Pool length | 7000 mm | 3000 – 12000 |
| Pool width | 3000 mm | 2000 – 8000 |
| Pool depth | 1500 mm | 500 – 3000 |
| Pool wall thickness | 150 mm | 80 – 400 |
| Courtyard margin around pool | 600 mm | 100 – 1500 |
| Pool 1 center X | 4500 mm | 0 – 28000 |
| Pool 1 center Y | -3000 mm | -5000 – 5000 |
| Pool 2 center X | 23500 mm | 0 – 28000 |
| Pool 2 center Y | -3000 mm | -5000 – 5000 |
| Stair core length | 3000 mm | 1500 – 6000 |
| Stair core width | 2500 mm | 1200 – 5000 |
| Stair core height | 9000 mm | 3000 – 12000 |
| Stair 1 center X | 13500 mm | 0 – 28000 |
| Stair 1 center Y | 2250 mm | -5000 – 5000 |
| Stair 2 center X | 25500 mm | 0 – 28000 |
| Stair 2 center Y | 2250 mm | -5000 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,