Enclosures and housings
Two-Story Modern Home Frame
- Bounding box
- 15000.1 × 10000.1 × 6750.1 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a multi-staged 2-story modern home frame structure utilizing explicit millimeter dimensions and parametric feature sequencing. STAGE 1 (FOUNDATION): Extrude a solid rectangular foundation block on the XY-plane measuring 15000mm width (X-axis), 10000mm depth (Y-axis), and 500mm thickness (Z-axis). STAGE 2 (GROUND FLOOR SHELL): On the top face of the foundation (Z=500mm), extrude a hollow rectangular perimeter shell with an outer dimension of 14800mm by 9800mm, a wall thickness of 300mm, and a vertical height of 3000mm. STAGE 3 (GROUND FLOOR CUTOUTS & OPENINGS): Apply a boolean pocket cut on the front wall (Y=0 plane alignment) centered at X=7500mm for a main entrance door measuring 2000mm width by 2400mm height, resting flush on the foundation. Apply two symmetrical rectangular window cutouts on the left and right sides of the door, each measuring 1800mm width by 1500mm height, positioned 1000mm above the foundation floor. STAGE 4 (MID-LEVEL FLOOR PLATE): At Z=3500mm, create a solid mid-level floor slab measuring 15000mm by 10000mm with a thickness of 250mm. Cut a rectangular opening out of this slab along the rear wall spanning from X=2000mm to X=4500mm, and Y=7000mm to Y=9500mm to accommodate a future structural staircase run. STAGE 5 (FIRST FLOOR SHELL): On top of the mid-level floor slab (Z=3750mm), extrude a second hollow rectangular perimeter shell matching the ground floor alignment, outer dimensions 14800mm by 9800mm, wall thickness of 300mm, and a vertical height of 2800mm. STAGE 6 (FIRST FLOOR BALCONY RECESS): Create a structural recess on the front-right corner of the first floor by offsetting the front wall inward by 2500mm over a span from X=9000mm to X=14800mm, leaving an open floor balcony platform. STAGE 7 (FLAT ROOF CAP & FILLET): At Z=6550mm, cap the structure with a final flat roof slab measuring 15000mm by 10000mm and 200mm thick. Apply a 100mm structural radius fillet to all four primary external vertical corners of the entire home frame from foundation to roof to smooth out the hard edges. All geometry must be generated as unified, manifold solid components with exact unit constraints.
Parameters
| Name | Value | Range |
|---|---|---|
| Foundation Width (X) | 15000 mm | 5000 – 40000 |
| Foundation Depth (Y) | 10000 mm | 4000 – 30000 |
| Foundation Thickness | 500 mm | 200 – 1500 |
| Wall Thickness | 300 mm | 100 – 800 |
| Wall Inset from Slab Edge | 100 mm | 0 – 1000 |
| Ground Wall Height | 3000 mm | 2000 – 6000 |
| Entrance Door Width | 2000 mm | 800 – 5000 |
| Entrance Door Height | 2400 mm | 1800 – 4000 |
| Window Width | 1800 mm | 500 – 4000 |
| Window Height | 1500 mm | 500 – 3000 |
| Window Sill Height | 1000 mm | 200 – 3000 |
| Door-to-Window Gap | 500 mm | 100 – 3000 |
| Mid Floor Slab Thickness | 250 mm | 100 – 800 |
| Stair Opening X Start | 2000 mm | 0 – 14000 |
| Stair Opening X End | 4500 mm | 0 – 14000 |
| Stair Opening Y Start | 7000 mm | 0 – 9500 |
| Stair Opening Y End | 9500 mm | 0 – 9500 |
| First Floor Wall Height | 2800 mm | 2000 – 6000 |
| Balcony Recess Depth | 2500 mm | 500 – 6000 |
| Balcony Recess X Start | 9000 mm | 0 – 14000 |
| Roof Slab Thickness | 200 mm | 100 – 800 |
| External Corner Fillet | 100 mm | 0 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no