Brackets and mounts
Two-Colour Twisted Hex Pen Holder
- Bounding box
- 84.7 × 88.3 × 101.6 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design a modern, two-color twisted hexagonal pen holder for FDM 3D printing. Overall height 100 mm, hexagonal width 75 mm across flats, with a gentle 15-degree twist from bottom to top. Use a hollow interior, 3 mm wall thickness, 4 mm solid base, flat bottom, and open top. COLOR DESIGN: - Bottom 30 mm: matte black PLA. - Upper 70 mm: pastel pink PLA. - Create a clean horizontal color transition at Z = 30 mm. MANUFACTURING REQUIREMENTS: - One continuous, watertight solid. - No separate parts, glue, screws, or assembly. - Printable upright without supports. - Compatible with a single filament change at Z = 30 mm. - Do not model the two colors as separate physical components. - Export STEP and STL files suitable for Fusion 360 and slicing software. Prioritize simple, reliable FDM printing and an elegant geometric appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 100 mm | 60 – 160 |
| Hex Width Across Flats | 75 mm | 40 – 120 |
| Total Twist (bottom to top) | 15 deg | 0 – 60 |
| Side Wall Thickness | 3 mm | 1.5 – 8 |
| Solid Base Thickness | 4 mm | 2 – 15 |
| Filament Change Height | 30 mm | 8 – 90 |
| Witness Groove Depth | 0.4 mm | 0.2 – 1 |
| Witness Groove Height | 1.2 mm | 0.6 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
